pysatadif


Namepysatadif JSON
Version 0.0.14 PyPI version JSON
download
home_pagehttps://github.com/jeremymturner/pysatadif
SummarySimple utility to generate proper ADIF for satellite contacts
upload_time2017-11-19 23:06:05
maintainer
docs_urlNone
authorJeremy Turner
requires_python
licenseApache
keywords hamradio satellites adif
VCS
bugtrack_url
requirements No requirements were recorded.
Travis-CI No Travis.
coveralls test coverage No coveralls.
            Generate ADIF For Satellite QSOs
================================

Quick Installation
==================

::

    pip install pysatadif


Upgrading
=========

::

    pip install --upgrade pysatadif


Quick Usage
==========

::

$ pysatadif --satname SO-50 --timeon 0050 --qso N0CALL --qso N1CALL --qso N2CALL,DM00 --output adif


Full Usage
==========

::

usage: pysatadif [-h] -s SATNAME -n TIMEON [-f TIMEOFF] [-d QSODATE]
                 [-g MYGRID] [-r MYRIG] [-c OPERATOR] [-t TXPWR] -q QSO
                 [-o OUTPUT] [-v]

optional arguments:
  -h, --help            show this help message and exit
  -s SATNAME, --satname SATNAME
                        Satellites to track
  -n TIMEON, --timeon TIMEON
                        Start time of QSO (HHMMSS)
  -f TIMEOFF, --timeoff TIMEOFF
                        End time of QSO (HHMMSS)
  -d QSODATE, --qsodate QSODATE
                        QSO Date (YYYYMMDD)
  -g MYGRID, --mygrid MYGRID
                        My grid square
  -r MYRIG, --myrig MYRIG
                        My rig
  -c OPERATOR, --operator OPERATOR
                        My callsign
  -t TXPWR, --txpwr TXPWR
                        TX Power
  -q QSO, --qso QSO     QSO callsign and optionally grid (eg N0CALL,DN70)
  -o OUTPUT, --output OUTPUT
                        Output Format (text, adif)
  -v, --verbose         Print verbose debugging messages


Configuration
=============
Run pysatadif once. Then see $HOME/.pysatadif/defaults.json

You may configure your callsign, maidenhead grid square, radio, and 
transmitting power which will apply to all passes. You may override 
these at any time by using the command-line switches.


Hints
=====
If the QSO was made on the current UTC day, you may leave out the
QSODATE parameter. If the QSO was made during the current UTC year, you 
may leave out the YYYY.

You may enter callsigns and grids in lower case, and they will be 
converted to upper case.

If you copied the other station's grid square, be sure to add it:
-q N0CALL,AA00. If you don't have it, leave the comma and following out.


History
=======
0.0.14 - Correcting README to reflect uploading and packaging to pypi
0.0.13 - Added error checking for timeon parameter
0.0.12 - Initial release
0.0.3  - Typo
0.0.2  - Moving data files to data, dynamically including them
0.0.1 - Initial Import, broken data files
            

Raw data

            {
    "maintainer": "", 
    "docs_url": null, 
    "requires_python": "", 
    "maintainer_email": "", 
    "cheesecake_code_kwalitee_id": null, 
    "keywords": "hamradio satellites adif", 
    "upload_time": "2017-11-19 23:06:05", 
    "author": "Jeremy Turner", 
    "home_page": "https://github.com/jeremymturner/pysatadif", 
    "github_user": "jeremymturner", 
    "download_url": "https://pypi.python.org/packages/12/7d/25a7491d49415f602c517c626d965ea9138cebd3817d417d8e6f7af73c70/pysatadif-0.0.14.tar.gz", 
    "platform": "", 
    "version": "0.0.14", 
    "cheesecake_documentation_id": null, 
    "description": "Generate ADIF For Satellite QSOs\n================================\n\nQuick Installation\n==================\n\n::\n\n    pip install pysatadif\n\n\nUpgrading\n=========\n\n::\n\n    pip install --upgrade pysatadif\n\n\nQuick Usage\n==========\n\n::\n\n$ pysatadif --satname SO-50 --timeon 0050 --qso N0CALL --qso N1CALL --qso N2CALL,DM00 --output adif\n\n\nFull Usage\n==========\n\n::\n\nusage: pysatadif [-h] -s SATNAME -n TIMEON [-f TIMEOFF] [-d QSODATE]\n                 [-g MYGRID] [-r MYRIG] [-c OPERATOR] [-t TXPWR] -q QSO\n                 [-o OUTPUT] [-v]\n\noptional arguments:\n  -h, --help            show this help message and exit\n  -s SATNAME, --satname SATNAME\n                        Satellites to track\n  -n TIMEON, --timeon TIMEON\n                        Start time of QSO (HHMMSS)\n  -f TIMEOFF, --timeoff TIMEOFF\n                        End time of QSO (HHMMSS)\n  -d QSODATE, --qsodate QSODATE\n                        QSO Date (YYYYMMDD)\n  -g MYGRID, --mygrid MYGRID\n                        My grid square\n  -r MYRIG, --myrig MYRIG\n                        My rig\n  -c OPERATOR, --operator OPERATOR\n                        My callsign\n  -t TXPWR, --txpwr TXPWR\n                        TX Power\n  -q QSO, --qso QSO     QSO callsign and optionally grid (eg N0CALL,DN70)\n  -o OUTPUT, --output OUTPUT\n                        Output Format (text, adif)\n  -v, --verbose         Print verbose debugging messages\n\n\nConfiguration\n=============\nRun pysatadif once. Then see $HOME/.pysatadif/defaults.json\n\nYou may configure your callsign, maidenhead grid square, radio, and \ntransmitting power which will apply to all passes. You may override \nthese at any time by using the command-line switches.\n\n\nHints\n=====\nIf the QSO was made on the current UTC day, you may leave out the\nQSODATE parameter. If the QSO was made during the current UTC year, you \nmay leave out the YYYY.\n\nYou may enter callsigns and grids in lower case, and they will be \nconverted to upper case.\n\nIf you copied the other station's grid square, be sure to add it:\n-q N0CALL,AA00. If you don't have it, leave the comma and following out.\n\n\nHistory\n=======\n0.0.14 - Correcting README to reflect uploading and packaging to pypi\n0.0.13 - Added error checking for timeon parameter\n0.0.12 - Initial release\n0.0.3  - Typo\n0.0.2  - Moving data files to data, dynamically including them\n0.0.1 - Initial Import, broken data files", 
    "lcname": "pysatadif", 
    "bugtrack_url": null, 
    "github": true, 
    "coveralls": false, 
    "name": "pysatadif", 
    "license": "Apache", 
    "travis_ci": false, 
    "github_project": "pysatadif", 
    "summary": "Simple utility to generate proper ADIF for satellite contacts", 
    "split_keywords": [
        "hamradio", 
        "satellites", 
        "adif"
    ], 
    "author_email": "jeremy@jeremymturner.com", 
    "urls": [
        {
            "has_sig": false, 
            "upload_time": "2017-11-19T23:06:05", 
            "comment_text": "", 
            "python_version": "source", 
            "url": "https://pypi.python.org/packages/12/7d/25a7491d49415f602c517c626d965ea9138cebd3817d417d8e6f7af73c70/pysatadif-0.0.14.tar.gz", 
            "md5_digest": "6c9aebcea617fc500fc78e7b0ae69096", 
            "downloads": 0, 
            "filename": "pysatadif-0.0.14.tar.gz", 
            "packagetype": "sdist", 
            "path": "12/7d/25a7491d49415f602c517c626d965ea9138cebd3817d417d8e6f7af73c70/pysatadif-0.0.14.tar.gz", 
            "size": 5741
        }
    ], 
    "_id": null, 
    "cheesecake_installability_id": null
}