####################
Nuitka User Manual
####################
This document is the recommended first read when you start using
**Nuitka**. On this page, you will learn more about **Nuitka**
fundamentals, such as license type, use cases, requirements, and
credits.
.. contents:: Table of Contents
:depth: 1
:local:
:class: page-toc
Nuitka is **the** Python compiler. It is written in Python. It is a
seamless replacement or extension to the Python interpreter and compiles
**every** construct that Python 2 (2.6, 2.7) and Python 3 (3.4 - 3.11)
have, when itself run with that Python version.
It then executes uncompiled code and compiled code together in an
extremely compatible manner.
You can use all Python library modules and all extension modules freely.
Nuitka translates the Python modules into a C level program that then
uses ``libpython`` and static C files of its own to execute in the same
way as CPython does.
All optimization is aimed at avoiding overhead, where it's unnecessary.
None is aimed at removing compatibility, although slight improvements
will occasionally be done, where not every bug of standard Python is
emulated, e.g. more complete error messages are given, but there is a
full compatibility mode to disable even that.
**************
Requirements
**************
To ensure smooth operation of **Nuitka**, make sure to follow system
requirements, that include the following components:
:depth: 1
:local:
C Compiler
==========
You need a C compiler with support for C11 or alternatively a C++
compiler for C++03 [#]_.
Currently, this means, you need to use one of these compilers:
- The MinGW64 C11 compiler, on Windows, must be based on gcc 11.2 or
higher. It will be *automatically* downloaded if no usable C compiler
is found, which is the recommended way of installing it, as Nuitka
will also upgrade it for you.
- Visual Studio 2022 or higher on Windows [#]_. English language pack
for best results (Nuitka filters away garbage outputs, but only for
English language). It will be used by default if installed.
- On all other platforms, the ``gcc`` compiler of at least version 5.1,
and below that the ``g++`` compiler of at least version 4.4 as an
alternative.
- The ``clang`` compiler on macOS X and most FreeBSD architectures.
- On Windows, the ``clang-cl`` compiler on Windows can be used if
provided by the Visual Studio installer.
.. [#]
Support for this C11 is given with gcc 5.x or higher or any clang
version.
The older MSVC compilers don't do it yet. But as a workaround, with
Python 3.10 or older, the C++03 language standard is significantly
overlapping with C11, it is then used instead.
.. [#]
Download for free from
https://www.visualstudio.com/en-us/downloads/download-visual-studio-vs.aspx
(the community editions work just fine).
The latest version is recommended, but not required. On the other hand,
there is no need to except to support pre-Windows 10 versions, and they
might work for you, but support of these configurations is only
available to commercial users.
Python
======
**Python 2** (2.6, 2.7) and **Python 3** (3.4 — 3.11) are supported. If
at any moment, there is a stable Python release that is not in this
list, rest assured it is being worked on and will be added.
.. important::
For Python 3.4 and *only* that version, we need other Python version
as a *compile time* dependency.
Nuitka itself is fully compatible with all listed versions, but Scons
as an internally used tool is not.
For these versions, you *need* a Python2 or Python 3.5 or higher
installed as well, but only during the compile time. That is for use
with Scons (which orchestrates the C compilation), which does not
support the same Python versions as Nuitka.
In addition, on Windows, Python2 cannot be used because ``clcache``
does not work with it, there a Python 3.5 or higher needs to be
installed.
Nuitka finds these needed Python versions (e.g. on Windows via
registry) and you shouldn't notice it as long as they are installed.
Increasingly, other functionality is available when another Python
has a certain package installed. For example, onefile compression
will work for a Python 2.x when another Python is found that has the
``zstandard`` package installed.
.. admonition:: Moving binaries to other machines
The created binaries can be made executable independent of the Python
installation, with ``--standalone`` and ``--onefile`` options.
.. admonition:: Binary filename suffix
The created binaries have an ``.exe`` suffix on Windows. On other
platforms they have no suffix for standalone mode, or ``.bin``
suffix, that you are free to remove or change, or specify with the
``-o`` option.
The suffix for acceleration mode is added just to be sure that the
original script name and the binary name do not ever collide, so we
can safely overwrite the binary without destroying the original
source file.
.. admonition:: It **has to** be CPython, Anaconda Python, or Homebrew
You need the standard Python implementation, called "CPython", to
execute Nuitka because it is closely tied to implementation details
of it.
.. admonition:: It **cannot be** from the Windows app store
It is known that Windows app store Python definitely does not work,
it's checked against.
.. admonition:: It **cannot be** pyenv on macOS
It is known that macOS "pyenv" does **not** work. Use Homebrew
instead for self compiled Python installations. But note that
standalone mode will be worse on these platforms and not be as
backward compatible with older macOS versions.
Operating System
================
Supported Operating Systems: Linux, FreeBSD, NetBSD, macOS, and Windows
(32 bits/64 bits/ARM).
Others will work as well. The portability is expected to be generally
good, but the e.g. Nuitka's internal Scons usage may have to be adapted
or need flags passed. Make sure to match Python and C compiler
architecture, or else you will get cryptic error messages.
Architecture
============
Supported Architectures are x86, x86_64 (amd64), and arm, likely many,
many more.
Other architectures are expected to also work, out of the box, as Nuitka
is generally not using any hardware specifics. These are just the ones
tested and known to be good. Feedback is welcome. Generally, the
architectures that Debian supports can be considered good and tested,
too.
*******
Usage
*******
Command Line
============
The recommended way of executing Nuitka is ``<the_right_python> -m
nuitka`` to be absolutely certain which Python interpreter you are
using, so it is easier to match with what Nuitka has.
The next best way of executing Nuitka bare that is from a source
checkout or archive, with no environment variable changes, most
noteworthy, you do not have to mess with ``PYTHONPATH`` at all for
Nuitka. You just execute the ``nuitka`` and ``nuitka-run`` scripts
directly without any changes to the environment. You may want to add the
``bin`` directory to your ``PATH`` for your convenience, but that step
is optional.
Moreover, if you want to execute with the right interpreter, in that
case, be sure to execute ``<the_right_python> bin/nuitka`` and be good.
.. admonition:: Pick the right Interpreter
If you encounter a ``SyntaxError`` you absolutely most certainly have
picked the wrong interpreter for the program you are compiling.
Nuitka has a ``--help`` option to output what it can do:
.. code:: bash
nuitka --help
The ``nuitka-run`` command is the same as ``nuitka``, but with a
different default. It tries to compile *and* directly execute a Python
script:
.. code:: bash
nuitka-run --help
This option that is different is ``--run``, and passing on arguments
after the first non-option to the created binary, so it is somewhat more
similar to what plain ``python`` will do.
Installation
============
For most systems, there will be packages on the `download page
<https://nuitka.net/doc/download.html>`__ of Nuitka. But you can also
install it from source code as described above, but also like any other
Python program it can be installed via the normal ``python setup.py
install`` routine.
Notice for integration with GitHub workflows there is this
`Nuitka-Action <https://github.com/Nuitka/Nuitka-Action>`__ that you
should use that makes it really easy to integrate. You ought to start
with a local compilation though, but this will be easiest for cross
platform compilation with Nuitka.
License
=======
Nuitka is licensed under the Apache License, Version 2.0; you may not
use it except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*************************************
Tutorial Setup and build on Windows
*************************************
This is basic steps if you have nothing installed, of course if you have
any of the parts, just skip it.
Setup
=====
Install Python
--------------
- Download and install Python from
https://www.python.org/downloads/windows
- Select one of ``Windows x86-64 web-based installer`` (64 bits Python,
recommended) or ``x86 executable`` (32 bits Python) installer.
- Verify it's working using command ``python --version``.
Install Nuitka
--------------
- ``python -m pip install nuitka``
- Verify using command ``python -m nuitka --version``
Write some code and test
========================
Create a folder for the Python code
-----------------------------------
- ``mkdir`` HelloWorld
- make a python file named **hello.py**
.. code:: python
def talk(message):
return "Talk " + message
def main():
print(talk("Hello World"))
if __name__ == "__main__":
main()
Test your program
-----------------
Do as you normally would. Running Nuitka on code that works incorrectly
is not easier to debug.
.. code:: bash
python hello.py
----
Build it using
--------------
.. code:: bash
python -m nuitka hello.py
.. note::
This will prompt you to download a C caching tool (to speed up
repeated compilation of generated C code) and a MinGW64 based C
compiler, unless you have a suitable MSVC installed. Say ``yes`` to
both those questions.
Run it
------
Execute the ``hello.exe`` created near ``hello.py``.
Distribute
----------
To distribute, build with ``--standalone`` option, which will not output
a single executable, but a whole folder. Copy the resulting
``hello.dist`` folder to the other machine and run it.
You may also try ``--onefile`` which does create a single file, but make
sure that the mere standalone is working, before turning to it, as it
will make the debugging only harder, e.g. in case of missing data files.
***********
Use Cases
***********
Use Case 1 — Program compilation with all modules embedded
==========================================================
If you want to compile a whole program recursively, and not only the
single file that is the main program, do it like this:
.. code:: bash
python -m nuitka --follow-imports program.py
.. note::
There are more fine-grained controls than ``--follow-imports``
available. Consider the output of ``nuitka --help``. Including fewer
modules into the compilation, but instead using normal Python for it,
will make it faster to compile.
In case you have a source directory with dynamically loaded files, i.e.
one which cannot be found by recursing after normal import statements
via the ``PYTHONPATH`` (which would be the recommended way), you can
always require that a given directory shall also be included in the
executable:
.. code:: bash
python -m nuitka --follow-imports --include-plugin-directory=plugin_dir program.py
.. note::
If you don't do any dynamic imports, simply setting your
``PYTHONPATH`` at compilation time is what you should do.
Use ``--include-plugin-directory`` only if you make ``__import__()``
calls that Nuitka cannot predict, and that come from a directory, for
everything from your Python installation, use ``--include-module`` or
``--include-package``.
.. note::
The resulting filename will be ``program.exe`` on Windows,
``program.bin`` on other platforms, but ``--output-filename`` allows
changing that.
.. note::
The resulting binary still depends on CPython and used C extension
modules being installed.
If you want to be able to copy it to another machine, use
``--standalone`` and copy the created ``program.dist`` directory and
execute the ``program.exe`` (Windows) or ``program`` (other
platforms) put inside.
Use Case 2 — Extension Module compilation
=========================================
If you want to compile a single extension module, all you have to do is
this:
.. code:: bash
python -m nuitka --module some_module.py
The resulting file ``some_module.so`` can then be used instead of
``some_module.py``.
.. important::
The filename of the produced extension module must not be changed as
Python insists on a module name derived function as an entry point,
in this case ``PyInit_some_module`` and renaming the file will not
change that. Match the filename of the source code to what the binary
name should be.
.. note::
If both the extension module and the source code of it are in the
same directory, the extension module is loaded. Changes to the source
code only have effect once you recompile.
.. note::
The option ``--follow-import-to`` works as well, but the included
modules will only become importable *after* you imported the
``some_module`` name. If these kinds of imports are invisible to
Nuitka, e.g. dynamically created, you can use ``--include-module`` or
``--include-package`` in that case, but for static imports it should
not be needed.
.. note::
An extension module can never include other extension modules. You
will have to create a wheel for this to be doable.
.. note::
The resulting extension module can only be loaded into a CPython of
the same version and doesn't include other extension modules.
Use Case 3 — Package compilation
================================
If you need to compile a whole package and embed all modules, that is
also feasible, use Nuitka like this:
.. code:: bash
python -m nuitka --module some_package --include-package=some_package
.. note::
The inclusion of the package contents needs to be provided manually;
otherwise, the package is mostly empty. You can be more specific if
you like, and only include part of it, or exclude part of it, e.g.
with ``--nofollow-import-to='*.tests'`` you would not include the
unused test part of your code.
.. note::
Data files located inside the package will not be embedded by this
process, you need to copy them yourself with this approach.
Alternatively, you can use the `file embedding of Nuitka commercial
<https://nuitka.net/doc/commercial/protect-data-files.html>`__.
Use Case 4 — Program Distribution
=================================
For distribution to other systems, there is the standalone mode, which
produces a folder for which you can specify ``--standalone``.
.. code:: bash
python -m nuitka --standalone program.py
Following all imports is default in this mode. You can selectively
exclude modules by specifically saying ``--nofollow-import-to``, but
then an ``ImportError`` will be raised when import of it is attempted at
program run time. This may cause different behavior, but it may also
improve your compile time if done wisely.
For data files to be included, use the option
``--include-data-files=<source>=<target>`` where the source is a file
system path, but the target has to be specified relative. For the
standalone mode, you can also copy them manually, but this can do extra
checks, and for the onefile mode, there is no manual copying possible.
To copy some or all file in a directory, use the option
``--include-data-files=/etc/*.txt=etc/`` where you get to specify shell
patterns for the files, and a subdirectory where to put them, indicated
by the trailing slash.
.. important::
Nuitka does not consider data files code, do not include DLLs, or
Python files as data files, and expect them to work, they will not,
unless you really know what you are doing.
In the following, non-code data files are all files, not matching on of
these criterions.
+------------+----------------------------------------------------------------------------------------+--------------------------------------------------------------------------------------------------------+
| Suffix | Rationale | Solution |
+============+========================================================================================+========================================================================================================+
| ``.py`` | Nuitka trims even the stdlib modules to be included. If it doesn't see Python code, | Use ``--include-module`` on them instead |
| | there is no dependencies analyzed, and as a result it will just not work. | |
+------------+----------------------------------------------------------------------------------------+--------------------------------------------------------------------------------------------------------+
| ``.pyc`` | Same as ``.py``. | Use ``--include-module`` on them from their source code instead. |
+------------+----------------------------------------------------------------------------------------+--------------------------------------------------------------------------------------------------------+
| ``.pyo`` | Same as ``.pyc``. | Use ``--include-module`` on them from their source code instead. |
+------------+----------------------------------------------------------------------------------------+--------------------------------------------------------------------------------------------------------+
| ``.pyw`` | Same as ``.py``. | For including multiple programs, use multiple ``--main`` arguments instead. |
+------------+----------------------------------------------------------------------------------------+--------------------------------------------------------------------------------------------------------+
| ``.pyi`` | These are ignored, because they are code-like and not needed at run time. For the | Raise an issue if 3rd part software needs it. |
| | ``lazy`` package that actually would depend on them, we made a compile time solution | |
| | that removes the need. | |
+------------+----------------------------------------------------------------------------------------+--------------------------------------------------------------------------------------------------------+
| ``.pyx`` | These are ignored, because they are Cython source code not used at run time | |
+------------+----------------------------------------------------------------------------------------+--------------------------------------------------------------------------------------------------------+
| ``.dll`` | These are ignored, since they **usually** are not data files. For the cases where 3rd | Create Nuitka Package configuration for those, with ``dll`` section for the package that uses them. |
| | party packages do actually used them as data, e.g. ``.NET`` packages, we solve that in | For rare cases, data-files section with special configuration might be the correct thing to do. |
| | package configuration for it. | |
+------------+----------------------------------------------------------------------------------------+--------------------------------------------------------------------------------------------------------+
| ``.dylib`` | These are ignored, since they macOS extension modules or DLLs. | Need to add configuration with ``dll`` section or ``depends`` that are missing |
+------------+----------------------------------------------------------------------------------------+--------------------------------------------------------------------------------------------------------+
| ``.so`` | These are ignored, since they Linux, BSD, etc. extension modules or DLLs. | Need to add configuration with ``dll`` section or ``depends`` that are missing |
+------------+----------------------------------------------------------------------------------------+--------------------------------------------------------------------------------------------------------+
| ``.exe`` | The are binaries to Windows. | You can add Nuitka Package configuration to include those as DLLs and mark them as ``executable: yes`` |
+------------+----------------------------------------------------------------------------------------+--------------------------------------------------------------------------------------------------------+
| ``.bin`` | The are binaries to non-Windows, otherwise same as ``.exe``. | |
+------------+----------------------------------------------------------------------------------------+--------------------------------------------------------------------------------------------------------+
Also folders are ignored, these are ``site-packages``, ``dist-packages``
and ``vendor-packages`` which would otherwise include a full virtualenv,
which is never a good thing to happen. And the ``__pycache__`` folder is
also always ignored. On non-MacOS the file ``.DS_Store`` is ignored too,
and ``py.typed`` folders have only meaning to IDEs, and are ignored like
``.pyi`` files .
To copy a whole folder with all non-code files, you can use
``--include-data-dir=/path/to/images=images`` which will place those in
the destination, and if you want to use the ``--noinclude-data-files``
option to remove them. Code files are as detailed above DLLs,
executables, Python files, etc. and will be ignored. For those you can
use the ``--include-data-files=/binaries/*.exe=binary/`` form to force
them, but that is not recommended and known to cause issues at run-time.
For package data, there is a better way, namely using
``--include-package-data``, which detects all non-code data files of
packages automatically and copies them over. It even accepts patterns in
a shell style. It spares you the need to find the package directory
yourself and should be preferred whenever available. Functionally it's
very similar to ``--include-data-dir`` but it has the benefit to locate
the correct folder for you.
With data files, you are largely on your own. Nuitka keeps track of ones
that are needed by popular packages, but it might be incomplete. Raise
issues if you encounter something in these. Even better, raise PRs with
enhancements to the Nuitka package configuration. With want 3rd party
software to just work out of the box.
When that is working, you can use the onefile mode if you so desire.
.. code:: bash
python -m nuitka --onefile program.py
This will create a single binary, that extracts itself on the target,
before running the program. But notice, that accessing files relative to
your program is impacted, make sure to read the section `Onefile:
Finding files`_ as well.
.. code:: bash
# Create a binary that unpacks into a temporary folder
python -m nuitka --onefile program.py
.. note::
There are more platform-specific options, e.g. related to icons,
splash screen, and version information, consider the ``--help``
output for the details of these and check the section Tweaks_.
For the unpacking, by default a unique user temporary path one is used,
and then deleted, however this default
``--onefile-tempdir-spec="{TEMP}/onefile_{PID}_{TIME}"`` can be
overridden with a path specification that is using then using a cached
path, avoiding repeated unpacking, e.g. with
``--onefile-tempdir-spec="{CACHE_DIR}/{COMPANY}/{PRODUCT}/{VERSION}"``
which uses version information, and user-specific cache directory.
.. note::
Using cached paths will be relevant, e.g. when Windows Firewall comes
into play because otherwise, the binary will be a different one to it
each time it is run.
Currently, these expanded tokens are available:
+----------------+-----------------------------------------------------------+---------------------------------------+
| Token | What this Expands to | Example |
+================+===========================================================+=======================================+
| {TEMP} | User temporary file directory | C:\\Users\\...\\AppData\\Locals\\Temp |
+----------------+-----------------------------------------------------------+---------------------------------------+
| {PID} | Process ID | 2772 |
+----------------+-----------------------------------------------------------+---------------------------------------+
| {TIME} | Time in seconds since the epoch. | 1299852985 |
+----------------+-----------------------------------------------------------+---------------------------------------+
| {PROGRAM} | Full program run-time filename of executable. | C:\\SomeWhere\\YourOnefile.exe |
+----------------+-----------------------------------------------------------+---------------------------------------+
| {PROGRAM_BASE} | No-suffix of run-time filename of executable. | C:\\SomeWhere\\YourOnefile |
+----------------+-----------------------------------------------------------+---------------------------------------+
| {CACHE_DIR} | Cache directory for the user. | C:\\Users\\SomeBody\\AppData\\Local |
+----------------+-----------------------------------------------------------+---------------------------------------+
| {COMPANY} | Value given as ``--company-name`` | YourCompanyName |
+----------------+-----------------------------------------------------------+---------------------------------------+
| {PRODUCT} | Value given as ``--product-name`` | YourProductName |
+----------------+-----------------------------------------------------------+---------------------------------------+
| {VERSION} | Combination of ``--file-version`` & ``--product-version`` | 3.0.0.0-1.0.0.0 |
+----------------+-----------------------------------------------------------+---------------------------------------+
| {HOME} | Home directory for the user. | /home/somebody |
+----------------+-----------------------------------------------------------+---------------------------------------+
| {NONE} | When provided for file outputs, ``None`` is used | see notice below |
+----------------+-----------------------------------------------------------+---------------------------------------+
| {NULL} | When provided for file outputs, ``os.devnull`` is used | see notice below |
+----------------+-----------------------------------------------------------+---------------------------------------+
.. important::
It is your responsibility to make the path provided unique, on
Windows a running program will be locked, and while using a fixed
folder name is possible, it can cause locking issues in that case,
where the program gets restarted.
Usually, you need to use ``{TIME}`` or at least ``{PID}`` to make a
path unique, and this is mainly intended for use cases, where e.g.
you want things to reside in a place you choose or abide your naming
conventions.
.. important::
For disabling output and stderr with ``--force-stdout-spec`` and
``--force-stderr-spec`` the values ``{NONE}`` and ``{NULL}`` achieve
it, but with different effect. With ``{NONE}``, the corresponding
handle becomes ``None``. As a result, e.g. ``sys.stdout`` will be
``None``, which is different from ``{NULL}`` where it will be backed
by a file pointing to ``os.devnull``, i.e. you can write to it.
With ``{NONE}``, you may e.g. get ``RuntimeError: lost sys.stdout``
in case it does get used; with ``{NULL}`` that never happens.
However, some libraries handle this as input for their logging
mechanism, and on Windows this is how you are compatible with
``pythonw.exe`` which is behaving like ``{NONE}``.
Use Case 5 — Setuptools Wheels
==============================
If you have a ``setup.py``, ``setup.cfg`` or ``pyproject.toml`` driven
creation of wheels for your software in place, putting Nuitka to use is
extremely easy.
Let's start with the most common ``setuptools`` approach, you can,
having Nuitka installed of course, simply execute the target
``bdist_nuitka`` rather than the ``bdist_wheel``. It takes all the
options and allows you to specify some more, that are specific to
Nuitka.
.. code:: python
# For setup.py if you don't use other build systems:
setup(
# Data files are to be handled by setuptools and not Nuitka
package_data={"some_package": ["some_file.txt"]},
...,
# This is to pass Nuitka options.
command_options={
'nuitka': {
# boolean option, e.g. if you cared for C compilation commands
'--show-scons': True,
# options without value, e.g. enforce using Clang
'--clang': None,
# options with single values, e.g. enable a plugin of Nuitka
'--enable-plugin': "pyside2",
# options with several values, e.g. avoiding including modules
'--nofollow-import-to' : ["*.tests", "*.distutils"],
},
},
)
# For setup.py with other build systems:
# The tuple nature of the arguments is required by the dark nature of
# "setuptools" and plugins to it, that insist on full compatibility,
# e.g. "setuptools_rust"
setup(
# Data files are to be handled by setuptools and not Nuitka
package_data={"some_package": ["some_file.txt"]},
...,
# This is to pass Nuitka options.
...,
command_options={
'nuitka': {
# boolean option, e.g. if you cared for C compilation commands
'--show-scons': ("setup.py", True),
# options without value, e.g. enforce using Clang
'--clang': ("setup.py", None),
# options with single values, e.g. enable a plugin of Nuitka
'--enable-plugin': ("setup.py", "pyside2"),
# options with several values, e.g. avoiding including modules
'--nofollow-import-to' : ("setup.py", ["*.tests", "*.distutils"]),
}
},
)
If for some reason, you cannot or do not want to change the target, you
can add this to your ``setup.py``.
.. code:: python
# For setup.py
setup(
...,
build_with_nuitka=True
)
.. note::
To temporarily disable the compilation, you could the remove above
line, or edit the value to ``False`` by or take its value from an
environment variable if you so choose, e.g.
``bool(os.getenv("USE_NUITKA", "True"))``. This is up to you.
Or you could put it in your ``setup.cfg``
.. code:: toml
[metadata]
build_with_nuitka = true
And last, but not least, Nuitka also supports the new ``build`` meta, so
when you have a ``pyproject.toml`` already, simple replace or add this
value:
.. code:: toml
[build-system]
requires = ["setuptools>=42", "wheel", "nuitka", "toml"]
build-backend = "nuitka.distutils.Build"
# Data files are to be handled by setuptools and not Nuitka
[tool.setuptools.package-data]
some_package = ['data_file.txt']
[tool.nuitka]
# These are not recommended, but they make it obvious to have effect.
# boolean option, e.g. if you cared for C compilation commands, leading
# dashes are omitted
show-scons = true
# options with single values, e.g. enable a plugin of Nuitka
enable-plugin = "pyside2"
# options with several values, e.g. avoiding including modules, accepts
# list argument.
nofollow-import-to = ["*.tests", "*.distutils"]
.. note::
For the ``nuitka`` requirement above absolute paths like
``C:\Users\...\Nuitka`` will also work on Linux, use an absolute path
with *two* leading slashes, e.g. ``//home/.../Nuitka``.
.. note::
Whatever approach you take, data files in these wheels are not
handled by Nuitka at all, but by setuptools. You can, however, use
the data file embedding of Nuitka commercial. In that case, you
actually would embed the files inside the extension module itself,
and not as a file in the wheel.
Use Case 6 — Multidist
======================
If you have multiple programs, that each should be executable, in the
past you had to compile multiple times, and deploy all of these. With
standalone mode, this, of course, meant that you were fairly wasteful,
as sharing the folders could be done, but wasn't really supported by
Nuitka.
Enter ``Multidist``. There is an option ``--main`` that replaces or adds
to the positional argument given. And it can be given multiple times.
When given multiple times, Nuitka will create a binary that contains the
code of all the programs given, but sharing modules used in them. They
therefore do not have to be distributed multiple times.
Let's call the basename of the main path, and entry point. The names of
these must, of course, be different. Then the created binary can execute
either entry point, and will react to what ``sys.argv[0]`` appears to
it. So if executed in the right way (with something like ``subprocess``
or OS API you can control this name), or by renaming or copying the
binary, or symlinking to it, you can then achieve the miracle.
This allows to combine very different programs into one.
.. note::
This feature is still experimental. Use with care and report your
findings should you encounter anything that is undesirable behavior
This mode works with standalone, onefile, and mere acceleration. It does
not work with module mode.
Use Case 7 — Building with GitHub Workflows
===========================================
For integration with GitHub workflows there is this `Nuitka-Action
<https://github.com/Nuitka/Nuitka-Action>`__ that you should use that
makes it really easy to integrate. You ought to start with a local
compilation though, but this will be easiest for cross platform
compilation with Nuitka.
This is an example workflow that builds on all 3 OSes
.. code:: yaml
jobs:
build:
strategy:
matrix:
os: [macos-latest, ubuntu-latest, windows-latest]
runs-on: ${{ matrix.os }}
steps:
- name: Check-out repository
uses: actions/checkout@v3
- name: Setup Python
uses: actions/setup-python@v4
with:
python-version: '3.10'
cache: 'pip'
cache-dependency-path: |
**/requirements*.txt
- name: Install your Dependencies
run: |
pip install -r requirements.txt -r requirements-dev.txt
- name: Build Executable with Nuitka
uses: Nuitka/Nuitka-Action@main
with:
nuitka-version: main
script-name: your_main_program.py
# many more Nuitka options available, see action doc, but it's best
# to use nuitka-project: options in your code, so e.g. you can make
# a difference for macOS and create an app bundle there.
onefile: true
- name: Upload Artifacts
uses: actions/upload-artifact@v3
with:
name: ${{ runner.os }} Build
path: | # match what's created for the 3 OSes
build/*.exe
build/*.bin
build/*.app/**/*
If you app is a GUI, e.g. ``your_main_program.py`` should contain these
comments as explained in `Nuitka Options in the code`_ since on macOS
this should then be a bundle.
.. code:: python
# Compilation mode, standalone everywhere, except on macOS there app bundle
# nuitka-project-if: {OS} in ("Windows", "Linux", "FreeBSD"):
# nuitka-project: --onefile
# nuitka-project-if: {OS} == "Darwin":
# nuitka-project: --standalone
# nuitka-project: --macos-create-app-bundle
#
# Debugging options, controlled via environment variable at compile time.
# nuitka-project-if: os.getenv("DEBUG_COMPILATION", "no") == "yes"
# nuitka-project: --enable-console
# nuitka-project-else:
# nuitka-project: --disable-console
********
Tweaks
********
Icons
=====
For good looks, you may specify icons. On Windows, you can provide an
icon file, a template executable, or a PNG file. All of these will work
and may even be combined:
.. code:: bash
# These create binaries with icons on Windows
python -m nuitka --onefile --windows-icon-from-ico=your-icon.png program.py
python -m nuitka --onefile --windows-icon-from-ico=your-icon.ico program.py
python -m nuitka --onefile --windows-icon-template-exe=your-icon.ico program.py
# These create application bundles with icons on macOS
python -m nuitka --macos-create-app-bundle --macos-app-icon=your-icon.png program.py
python -m nuitka --macos-create-app-bundle --macos-app-icon=your-icon.icns program.py
.. note::
With Nuitka, you do not have to create platform-specific icons, but
instead it will convert e.g. PNG, but also other formats on the fly
during the build.
MacOS Entitlements
==================
Entitlements for an macOS application bundle can be added with the
option, ``--macos-app-protected-resource``, all values are listed on
`this page from Apple
<https://developer.apple.com/documentation/bundleresources/information_property_list/protected_resources>`__
An example value would be
``--macos-app-protected-resource=NSMicrophoneUsageDescription:Microphone
access`` for requesting access to a Microphone. After the colon, the
descriptive text is to be given.
.. note::
Beware that in the likely case of using spaces in the description
part, you need to quote it for your shell to get through to Nuitka
and not be interpreted as Nuitka arguments.
Console Window
==============
On Windows, the console is opened by programs unless you say so. Nuitka
defaults to this, effectively being only good for terminal programs, or
programs where the output is requested to be seen. There is a difference
in ``pythonw.exe`` and ``python.exe`` along those lines. This is
replicated in Nuitka with the option ``--disable-console``. Nuitka
recommends you to consider this in case you are using ``PySide6`` e.g.
and other GUI packages, e.g. ``wx``, but it leaves the decision up to
you. In case, you know your program is console application, just using
``--enable-console`` which will get rid of these kinds of outputs from
Nuitka.
.. note::
The ``pythonw.exe`` is never good to be used with Nuitka, as you
cannot see its output.
Splash screen
=============
Splash screens are useful when program startup is slow. Onefile startup
itself is not slow, but your program may be, and you cannot really know
how fast the computer used will be, so it might be a good idea to have
them. Luckily, with Nuitka, they are easy to add for Windows.
For the splash screen, you need to specify it as a PNG file, and then
make sure to disable the splash screen when your program is ready, e.g.
has completed the imports, prepared the window, connected to the
database, and wants the splash screen to go away. Here we are using the
project syntax to combine the code with the creation, compile this:
.. code:: python
# nuitka-project: --onefile
# nuitka-project: --onefile-windows-splash-screen-image={MAIN_DIRECTORY}/Splash-Screen.png
# Whatever this is, obviously
print("Delaying startup by 10s...")
import time, tempfile, os
time.sleep(10)
# Use this code to signal the splash screen removal.
if "NUITKA_ONEFILE_PARENT" in os.environ:
splash_filename = os.path.join(
tempfile.gettempdir(),
"onefile_%d_splash_feedback.tmp" % int(os.environ["NUITKA_ONEFILE_PARENT"]),
)
if os.path.exists(splash_filename):
os.unlink(splash_filename)
print("Done... splash should be gone.")
...
# Rest of your program goes here.
Reports
=======
For analysis of your program and Nuitka packaging, there is the
`Compilation Report`_ available. You can also make custom reports by
providing your template, with a few of them built-in to Nuitka. These
reports carry all the detail information, e.g. when a module was
attempted to be imported, but not found, you can see where that happens.
For bug reporting, it is very much recommended to provide the report.
Version Information
===================
You can attach copyright and trademark information, company name,
product name, and so on to your compilation. This is then used in
version information for the created binary on Windows, or application
bundle on macOS. If you find something that is lacking, please let us
know.
******************
Typical Problems
******************
Deployment Mode
===============
By default, Nuitka compiles without ``--deployment`` which leaves a set
of safe guards and helpers on, that are aimed at debugging wrong uses of
Nuitka.
This is a new feature, and implements a bunch of protections and
helpers, that are documented here.
Fork bombs (self-execution)
---------------------------
So after compilation, ``sys.executable`` is the compiled binary. In case
of packages like ``multiprocessing``, ``joblib``, or ``loky`` what these
typically do is to expect to run from a full ``python`` with
``sys.executable`` and then to be able to use its options like ``-c
command`` or ``-m module_name`` and then be able to launch other code
temporarily or permanently as a service daemon.
With Nuitka however, this executes your program again, and puts these
arguments, in ``sys.argv`` where you maybe ignore them, and then you
fork yourself again to launch the helper daemons. Sometimes this ends up
spawning CPU count processes that spawn CPU count processes that... this
is called a fork bomb, and with almost all systems, that freezes them
easily to death.
That is why e.g. this happens with default Nuitka:
.. code::
./hello.dist/hello.bin -l fooL -m fooM -n fooN -o fooO -p
Error, the program tried to call itself with '-m' argument. Disable with '--no-deployment-flag=self-execution'.
Your program may well have its own command line parsing, and not use an
unsupported package that does attempt to re-execute. In this case, you
need at *compile time* to use ``--no-deployment-flag=self-execution``
which disables this specific guard.
Misleading Messages
-------------------
Some packages output what they think is helpful information about what
the reason of a failed import might mean. With compiled programs there
are very often just plain wrong. We try and repair those in
non-deployment mode. Here is an example, where we change a message that
asks to pip install (which is not the issue) to point the user to the
include command that makes an ``imageio`` plugin work.
.. code:: yaml
- module-name: 'imageio.core.imopen'
anti-bloat:
- replacements_plain:
'`pip install imageio[{config.install_name}]` to install it': '`--include-module={config.module_name}` with Nuitka to include it'
'err_type = ImportError': 'err_type = RuntimeError'
when: 'not deployment'
And much more
-------------
The deployment mode is relatively new and has constantly more features
added, e.g. something for ``FileNotFoundError`` should be coming soon.
Disabling All
-------------
All these helpers can of course be disabled at once with
``--deployment`` but keep in mind that for debugging, you may want to
re-enable it. You might want to use Nuitka Project options and an
environment variable to make this conditional.
Should you disable them all?
We believe, disabling should only happen selectively, but with PyPI
upgrades, your code changes, all of these issues can sneak back in. The
space saving of deployment mode is currently negligible, so attempt to
not do it, but review what exists, and if you know that it cannot affect
you, or if it does, you will not need it. Some of the future ones, will
clearly be geared at beginner level usage.
Windows Virus scanners
======================
Binaries compiled on Windows with default settings of Nuitka and no
further actions taken might be recognized by some AV vendors as malware.
This is avoidable, but only in Nuitka commercial there is actual support
and instructions for how to do it, seeing this as a typical commercial
only need. https://nuitka.net/doc/commercial.html
Linux Standalone
================
For Linux standalone it is pretty difficult to build a binary that works
on other Linux versions. This is mainly because on Linux, much software
is built specifically targeted to concrete DLLs. Things like glibc used,
are then encoded into the binary built, and it will not run with an
older glibc, just to give one critical example.
The solution is to build on the oldest OS that you want to see
supported. Picking that and setting it up can be tedious, so can be
login, and keeping it secure, as it's something you put your source code
on.
To aid that, Nuitka commercial has container based builds, that you can
use. This uses dedicated optimized Python builds, targets CentOS 7 and
supports even newest Pythons and very old OSes that way using recent C
compiler chains all turn key solution. The effort needs to be
compensated to support Nuitka development for Linux, there you need to
purchase it https://nuitka.net/doc/commercial.html but even a sponsor
license will be cheaper than doing it yourself.
Program crashes system (fork bombs)
===================================
A fork bomb is a program that starts itself over and over. This can
easily happen, since ``sys.executable`` for compiled programs is not a
Python interpreter, and packages that try to do multiprocessing in a
better way, often relaunch themselves through this, and Nuitka needs and
does have handling for these with known packages. However, you may
encounter a situation where the detection of this fails. See deployment
option above that is needed to disable this protection.
When this fork bomb happens easily all memory, all CPU of the system
that is available to the user is being used, and even the most powerful
build system will go down in flames sometimes needing a hard reboot.
For fork bombs, we can use ``--experimental=debug-self-forking`` and see
what it does, and we have a trick, that prevents fork bombs from having
any actual success in their bombing. Put this at the start of your
program.
.. code:: python
import os, sys
if "NUITKA_LAUNCH_TOKEN" not in os.environ:
sys.exit("Error, need launch token or else fork bomb suspected.")
else:
del os.environ["NUITKA_LAUNCH_TOKEN"]
Actually Nuitka is trying to get ahold of them without the deployment
option already, finding "-c" and "-m" options, but it may not be perfect
or not work well with a package (anymore).
Memory issues and compiler bugs
===============================
In some cases, the C compilers will crash saying they cannot allocate
memory or that some input was truncated, or similar error messages,
clearly from it. These are example error messages, that are a sure sign
of too low memory, there is no end to them.
.. code::
# gcc
fatal error: error writing to -: Invalid argument
Killed signal terminated program
# MSVC
fatal error C1002: compiler is out of heap space in pass 2
fatal error C1001: Internal compiler error
There are several options you can explore here.
Ask Nuitka to use less memory
-----------------------------
There is a dedicated option ``--low-memory`` which influences decisions
of Nuitka, such that it avoids high usage of memory during compilation
at the cost of increased compile time.
Avoid 32 bit C compiler/assembler memory limits
-----------------------------------------------
Do not use a 32 bit compiler, but a 64 bit one. If you are using Python
with 32 bits on Windows, you most definitely ought to use MSVC as the C
compiler, and not MinGW64. The MSVC is a cross-compiler, and can use
more memory than gcc on that platform. If you are not on Windows, that
is not an option, of course. Also, using the 64 bit Python will work.
Use a minimal virtualenv
------------------------
When you compile from a living installation, that may well have many
optional dependencies of your software installed. Some software will
then have imports on these, and Nuitka will compile them as well. Not
only may these be just the troublemakers, they also require more memory,
so get rid of that. Of course, you do have to check that your program
has all the needed dependencies before you attempt to compile, or else
the compiled program will equally not run.
Use LTO compilation or not
--------------------------
With ``--lto=yes`` or ``--lto=no`` you can switch the C compilation to
only produce bytecode, and not assembler code and machine code directly,
but make a whole program optimization at the end. This will change the
memory usage pretty dramatically, and if your error is coming from the
assembler, using LTO will most definitely avoid that.
Switch the C compiler to clang
------------------------------
People have reported that programs that fail to compile with gcc due to
its bugs or memory usage work fine with clang on Linux. On Windows, this
could still be an option, but it needs to be implemented first for the
automatic downloaded gcc, that would contain it. Since MSVC is known to
be more memory effective anyway, you should go there, and if you want to
use Clang, there is support for the one contained in MSVC.
Add a larger swap file to your embedded Linux
---------------------------------------------
On systems with not enough RAM, you need to use swap space. Running out
of it is possibly a cause, and adding more swap space, or one at all,
might solve the issue, but beware that it will make things extremely
slow when the compilers swap back and forth, so consider the next tip
first or on top of it.
Limit the amount of compilation jobs
------------------------------------
With the ``--jobs`` option of Nuitka, it will not start many C compiler
instances at once, each competing for the scarce resource of RAM. By
picking a value of one, only one C compiler instance will be running,
and on an 8 core system, that reduces the amount of memory by factor 8,
so that's a natural choice right there.
Dynamic ``sys.path``
====================
If your script modifies ``sys.path``, e.g. inserts directories with
source code relative to it, Nuitka will not be able to see those.
However, if you set the ``PYTHONPATH`` to the resulting value, it will
be able to compile it and find the used modules from these paths as
well.
Manual Python File Loading
==========================
A very frequent pattern with private code is that it scans plugin
directories of some kind, and e.g. uses ``os.listdir``, then considers
Python filenames, and then opens a file and does ``exec`` on them. This
approach works for Python code, but for compiled code, you should use
this much cleaner approach, that works for pure Python code and is a lot
less vulnerable.
.. code:: python
# Using a package name, to locate the plugins. This is also a sane
# way to organize them into a directory.
scan_path = scan_package.__path__
for item in pkgutil.iter_modules(scan_path):
importlib.import_module(scan_package.__name__ + "." + item.name)
# You may want to do it recursively, but we don't do this here in
# this example. If you'd like to, handle that in this kind of branch.
if item.ispkg:
...
Missing data files in standalone
================================
If your program fails to find data file, it can cause all kinds of
different behavior, e.g. a package might complain it is not the right
version because a ``VERSION`` file check defaulted to an unknown. The
absence of icon files or help texts, may raise strange errors.
Often the error paths for files not being present are even buggy and
will reveal programming errors like unbound local variables. Please look
carefully at these exceptions, keeping in mind that this can be the
cause. If your program works without standalone, chances are data files
might be the cause.
The most common error indicating file absence is of course an uncaught
``FileNotFoundError`` with a filename. You should figure out what
package is missing files and then use ``--include-package-data``
(preferably), or ``--include-data-dir``/``--include-data-files`` to
include them.
Missing DLLs/EXEs in standalone
===============================
Nuitka has plugins that deal with copying DLLs. For NumPy, SciPy,
Tkinter, etc.
These need special treatment to be able to run on other systems.
Manually copying them is not enough and will give strange errors.
Sometimes newer version of packages, esp. NumPy can be unsupported. In
this case, you will have to raise an issue, and use the older one.
If you want to manually add a DLL or an EXE because it is your project
only, you will have to use user Yaml files describing where they can be
found. This is described in detail with examples in the `Nuitka Package
Configuration <https://nuitka.net/doc/nuitka-package-config.html>`__
page.
Dependency creep in standalone
==============================
Some packages are a single import, but to Nuitka mean that more than a
thousand packages (literally) are to be included. The prime example of
Pandas, which does want to plug and use just about everything you can
imagine. Multiple frameworks for syntax highlighting everything
imaginable take time.
Nuitka will have to learn effective caching to deal with this in the
future. Presently, you will have to deal with huge compilation times for
these.
A major weapon in fighting dependency creep should be applied, namely
the ``anti-bloat`` plugin, which offers interesting abilities, that can
be put to use and block unneeded imports, giving an error for where they
occur. Use it e.g. like this ``--noinclude-pytest-mode=nofollow
--noinclude-setuptools-mode=nofollow`` and e.g. also
``--noinclude-custom-mode=setuptools:error`` to get the compiler to
error out for a specific package. Make sure to check its help output. It
can take for each module of your choice, e.g. forcing also that e.g.
``PyQt5`` is considered uninstalled for standalone mode.
It's also driven by a configuration file, ``anti-bloat.yml`` that you
can contribute to, removing typical bloat from packages. Please don't
hesitate to enhance it and make PRs towards Nuitka with it.
Standalone: Finding files
=========================
The standard code that normally works, also works, you should refer to
``os.path.dirname(__file__)`` or use all the packages like ``pkgutil``,
``pkg_resources``, ``importlib.resources`` to locate data files near the
standalone binary.
.. important::
What you should **not** do, is use the current directory
``os.getcwd``, or assume that this is the script directory, e.g. with
paths like ``data/``.
If you did that, it was never good code. Links, to a program,
launching from another directory, etc. will all fail in bad ways. Do
not make assumptions about the directory your program is started
from.
In case you mean to refer to the location of the ``.dist`` folder for
files that are to reside near the binary, there is
``__compiled__.containing_dir`` that also abstracts all differences with
``--macos-create-app-bundle`` and the ``.app`` folder a having more
nested structure.
.. code:: python
# This will find a file *near* your app or dist folder
try:
open(os.path.join(__compiled__.containing_dir, "user-provided-file.txt"))
except NameError:
open(os.path.join(os.path.dirname(sys.argv[0]), "user-provided-file.txt"))
Onefile: Finding files
======================
There is a difference between ``sys.argv[0]`` and ``__file__`` of the
main module for the onefile mode, that is caused by using a bootstrap to
a temporary location. The first one will be the original executable
path, whereas the second one will be the temporary or permanent path the
bootstrap executable unpacks to. Data files will be in the later
location, your original environment files will be in the former
location.
Given 2 files, one which you expect to be near your executable, and one
which you expect to be inside the onefile binary, access them like this.
.. code:: python
# This will find a file *near* your onefile.exe
open(os.path.join(os.path.dirname(sys.argv[0]), "user-provided-file.txt"))
# This will find a file *inside* your onefile.exe
open(os.path.join(os.path.dirname(__file__), "user-provided-file.txt"))
# This will find a file *near* your onefile binary and work for standalone too
try:
open(os.path.join(__compiled__.containing_dir, "user-provided-file.txt"))
except NameError:
open(os.path.join(os.path.dirname(sys.argv[0]), "user-provided-file.txt"))
Windows Programs without console give no errors
===============================================
For debugging purposes, remove ``--disable-console`` or use the options
``--force-stdout-spec`` and ``--force-stderr-spec`` with paths as
documented for ``--onefile-tempdir-spec`` above. These can be relative
to the program or absolute, so you can see the outputs given.
Deep copying uncompiled functions
=================================
Sometimes people use this kind of code, which for packages on PyPI, we
deal with by doing source code patches on the fly. If this is in your
own code, here is what you can do:
.. code:: python
def binder(func, name):
result = types.FunctionType(func.__code__, func.__globals__, name=func.__name__, argdefs=func.__defaults__, closure=func.__closure__)
result = functools.update_wrapper(result, func)
result.__kwdefaults__ = func.__kwdefaults__
result.__name__ = name
return result
Compiled functions cannot be used to create uncompiled ones from, so the
above code will not work. However, there is a dedicated ``clone``
method, that is specific to them, so use this instead.
.. code:: python
def binder(func, name):
try:
result = func.clone()
except AttributeError:
result = types.FunctionType(func.__code__, func.__globals__, name=func.__name__, argdefs=func.__defaults__, closure=func.__closure__)
result = functools.update_wrapper(result, func)
result.__kwdefaults__ = func.__kwdefaults__
result.__name__ = name
return result
Modules: Extension modules are not executable directly
======================================================
A package can be compiled with Nuitka, no problem, but when it comes to
executing it, ``python -m compiled_module`` is not going to work and
give the error ``No code object available for AssertsTest`` because the
compiled module is not source code, and Python will not just load it.
The closest would be ``python -c "import compile_module"`` and you might
have to call the main function yourself.
To support this, the CPython ``runpy`` and/or ``ExtensionFileLoader``
would need improving such that Nuitka could supply its compiled module
object for Python to use.
******
Tips
******
Nuitka Options in the code
==========================
One clean way of providing options to Nuitka, that you will always use
for your program, is to put them into the main file you compile. There
is even support for conditional options, and options using pre-defined
variables, this is an example:
.. code:: python
# Compilation mode, support OS-specific options
# nuitka-project-if: {OS} in ("Windows", "Linux", "Darwin", "FreeBSD"):
# nuitka-project: --onefile
# nuitka-project-else:
# nuitka-project: --standalone
# The PySide2 plugin covers qt-plugins
# nuitka-project: --enable-plugin=pyside2
# nuitka-project: --include-qt-plugins=qml
The comments must be at the start of lines, and indentation inside of
them is to be used, to end a conditional block, much like in Python.
There are currently no other keywords than the used ones demonstrated
above.
You can put arbitrary Python expressions there, and if you wanted to
e.g. access a version information of a package, you could simply use
``__import__("module_name").__version__`` if that would be required to
e.g. enable or disable certain Nuitka settings. The only thing Nuitka
does that makes this not Python expressions, is expanding ``{variable}``
for a pre-defined set of variables:
Table with supported variables:
+------------------+--------------------------------+------------------------------------------+
| Variable | What this Expands to | Example |
+==================+================================+==========================================+
| {OS} | Name of the OS used | Linux, Windows, Darwin, FreeBSD, OpenBSD |
+------------------+--------------------------------+------------------------------------------+
| {Version} | Version of Nuitka | e.g. (1, 6, 0) |
+------------------+--------------------------------+------------------------------------------+
| {Commercial} | Version of Nuitka Commercial | e.g. (2, 1, 0) |
+------------------+--------------------------------+------------------------------------------+
| {Arch} | Architecture used | x86_64, arm64, etc. |
+------------------+--------------------------------+------------------------------------------+
| {MAIN_DIRECTORY} | Directory of the compiled file | some_dir/maybe_relative |
+------------------+--------------------------------+------------------------------------------+
| {Flavor} | Variant of Python | e.g. Debian Python, Anaconda Python |
+------------------+--------------------------------+------------------------------------------+
The use of ``{MAIN_DIRECTORY}`` is recommended when you want to specify
a filename relative to the main script, e.g. for use in data file
options or user package configuration yaml files,
.. code:: python
# nuitka-project: --include-data-files={MAIN_DIRECTORY}/my_icon.png=my_icon.png
# nuitka-project: --user-package-configuration-file={MAIN_DIRECTORY}/user.nuitka-package.config.yml
Python command line flags
=========================
For passing things like ``-O`` or ``-S`` to Python, to your compiled
program, there is a command line option name ``--python-flag=`` which
makes Nuitka emulate these options.
The most important ones are supported, more can certainly be added.
Caching compilation results
===========================
The C compiler, when invoked with the same input files, will take a long
time and much CPU to compile over and over. Make sure you are having
``ccache`` installed and configured when using gcc (even on Windows). It
will make repeated compilations much faster, even if things are not yet
not perfect, i.e. changes to the program can cause many C files to
change, requiring a new compilation instead of using the cached result.
On Windows, with gcc Nuitka supports using ``ccache.exe`` which it will
offer to download from an official source and it automatically. This is
the recommended way of using it on Windows, as other versions can e.g.
hang.
Nuitka will pick up ``ccache`` if it's found in system ``PATH``, and it
will also be possible to provide if by setting ``NUITKA_CCACHE_BINARY``
to the full path of the binary, this is for use in CI systems where
things might be non-standard.
For the MSVC compilers and ClangCL setups, using the ``clcache`` is
automatic and included in Nuitka.
On macOS and Intel, there is an automatic download of a ``ccache``
binary from our site, for arm64 arches, it's recommended to use this
setup, which installs Homebrew and ccache in there. Nuitka picks that
one up automatically if it on that kind of machine. You need and should
not use Homebrew with Nuitka otherwise, it's not the best for standalone
deployments, but we can take ``ccache`` from there.
.. code:: bash
export HOMEBREW_INSTALL_FROM_API=1
/bin/bash -c "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install.sh)"
eval $(/opt/homebrew/bin/brew shellenv)
brew install ccache
Control where Caches live
=========================
The storage for cache results of all kinds, downloads, cached
compilation results from C and Nuitka, is done in a platform dependent
directory as determined by the ``appdirs`` package. However, you can
override it with setting the environment variable ``NUITKA_CACHE_DIR``
to a base directory. This is for use in environments where the home
directory is not persisted, but other paths are.
There is also per cache control of these caches, here is a table of
environment variables that you can set before starting the compilation,
to make Nuitka store some of these caches in an entirely separate space.
+------------------+-----------------------------------+----------------------------------------+
| Cache name | Environment Variable | Data Put there |
+==================+===================================+========================================+
| downloads | NUITKA_CACHE_DIR_DOWNLOADS | Downloads made, e.g. dependency walker |
+------------------+-----------------------------------+----------------------------------------+
| ccache | NUITKA_CACHE_DIR_CCACHE | Object files created by gcc |
+------------------+-----------------------------------+----------------------------------------+
| clcache | NUITKA_CACHE_DIR_CLCACHE | Object files created by MSVC |
+------------------+-----------------------------------+----------------------------------------+
| bytecode | NUITKA_CACHE_DIR_BYTECODE | Bytecode of demoted modules |
+------------------+-----------------------------------+----------------------------------------+
| dll-dependencies | NUITKA_CACHE_DIR_DLL_DEPENDENCIES | DLL dependencies |
+------------------+-----------------------------------+----------------------------------------+
Runners
=======
Avoid running the ``nuitka`` binary, doing ``python -m nuitka`` will
make a 100% sure you are using what you think you are. Using the wrong
Python will make it give you ``SyntaxError`` for good code or
``ImportError`` for installed modules. That is happening, when you run
Nuitka with Python2 on Python3 code and vice versa. By explicitly
calling the same Python interpreter binary, you avoid that issue
entirely.
Fastest C Compilers
===================
The fastest binaries of ``pystone.exe`` on Windows with 64 bits Python
proved to be significantly faster with MinGW64, roughly 20% better
score. So it is recommended for use over MSVC. Using ``clang-cl.exe`` of
Clang7 was faster than MSVC, but still significantly slower than
MinGW64, and it will be harder to use, so it is not recommended.
On Linux, for ``pystone.bin``, the binary produced by ``clang6`` was
faster than ``gcc-6.3``, but not by a significant margin. Since gcc is
more often already installed, that is recommended to use for now.
Differences in C compilation times have not yet been examined.
Unexpected Slowdowns
====================
Using the Python DLL, like standard CPython does, can lead to unexpected
slowdowns, e.g. in uncompiled code that works with Unicode strings. This
is because calling to the DLL rather than residing in the DLL causes
overhead, and this even happens to the DLL with itself, being slower,
than a Python all contained in one binary.
So if feasible, aim at static linking, which is currently only possible
with Anaconda Python on non-Windows, Debian Python2, self compiled
Pythons (do not activate ``--enable-shared``, not needed), and installs
created with ``pyenv``.
.. note::
On Anaconda, you may need to execute ``conda install
libpython-static``
Standalone executables and dependencies
=======================================
The process of making standalone executables for Windows traditionally
involves using an external dependency walker to copy necessary libraries
along with the compiled executables to the distribution folder.
There are plenty of ways to find that something is missing. Do not
manually copy things into the folder, esp. not DLLs, as that's not going
to work. Instead, make bug reports to get these handled by Nuitka
properly.
Windows errors with resources
=============================
On Windows, the Windows Defender tool and the Windows Indexing Service
both scan the freshly created binaries, while Nuitka wants to work with
it, e.g. adding more resources, and then preventing operations randomly
due to holding locks. Make sure to exclude your compilation stage from
these services.
Windows standalone program redistribution
=========================================
Whether compiling with MingW or MSVC, the standalone programs have
external dependencies to Visual C Runtime libraries. Nuitka tries to
ship those dependent DLLs by copying them from your system.
Beginning with Microsoft Windows 10, Microsoft ships ``ucrt.dll``
(Universal C Runtime libraries) which handles calls to
``api-ms-crt-*.dll``.
With earlier Windows platforms (and wine/ReactOS), you should consider
installing Visual C runtime libraries before executing a Nuitka
standalone compiled program.
Depending on the used C compiler, you'll need the following redist
versions on the target machines. However, notice that compilation using
the 14.3 based version is always recommended, working and best
supported, unless you want to target Windows 7.
+------------------+-------------+----------+
| Visual C version | Redist Year | CPython |
+==================+=============+==========+
| 14.3 | 2022 | 3.11 |
+------------------+-------------+----------+
| 14.2 | 2019 | 3.5-3.10 |
+------------------+-------------+----------+
| 14.1 | 2017 | 3.5-3.8 |
+------------------+-------------+----------+
| 14.0 | 2015 | 3.5-3.8 |
+------------------+-------------+----------+
| 10.0 | 2010 | 3.4 |
+------------------+-------------+----------+
| 9.0 | 2008 | 2.6, 2.7 |
+------------------+-------------+----------+
When using MingGW64 as downloaded by Nuitka, you'll need the following
redist versions:
+----------------------------+-------------+---------------------+
| MingGW64 version | Redist Year | CPython |
+============================+=============+=====================+
| WinLibs automatic download | 2015 | 2.6, 2.7, 3.4- 3.11 |
+----------------------------+-------------+---------------------+
Once the corresponding runtime libraries are installed on the target
system, you may remove all ``api-ms-crt-*.dll`` files from your Nuitka
compiled dist folder.
Detecting Nuitka at run time
============================
Nuitka does *not* ``sys.frozen`` unlike other tools because it usually
triggers inferior code for no reason. For Nuitka, we have the module
attribute ``__compiled__`` to test if a specific module was compiled,
and the function attribute ``__compiled__`` to test if a specific
function was compiled.
Providing extra Options to Nuitka C compilation
===============================================
Nuitka will apply values from the environment variables ``CCFLAGS``,
``LDFLAGS`` during the compilation on top of what it determines to be
necessary. Beware, of course, that is this is only useful if you know
what you are doing, so should this pose issues, raise them only with
perfect information.
Producing a 32 bit binary on a 64 bit Windows system
====================================================
Nuitka will automatically target the architecture of the Python you are
using. If this is 64 bit, it will create a 64 bit binary, if it is 32
bit, it will create a 32 bit binary. You have the option to select the
bits when you download the Python. In the output of ``python -m nuitka
--version`` there is a line for the architecture. It's ``Arch: x86_64``
for 64 bits, and just ``Arch: x86`` for 32 bits.
The C compiler will be picked to match that more or less automatically.
If you specify it explicitly, and it mismatches, you will get a warning
about the mismatch and informed that your compiler choice was rejected.
********************
Compilation Report
********************
When you use ``--report=compilation-report.xml`` Nuitka will create an
XML file with detailed information about the compilation and packaging
process. This is growing in completeness with every release and exposes
module usage attempts, timings of the compilation, plugin influences,
data file paths, DLLs, and reasons why things are included or not.
At this time, the report contains absolute paths in some places, with
your private information. The goal is to make this blended out by
default because we also want to become able to compare compilation
reports from different setups, e.g. with updated packages, and see the
changes to Nuitka. The report is, however, recommended for your bug
reporting.
Also, another form is available, where the report is free form and
according to a Jinja2 template of yours, and one that is included in
Nuitka. The same information as used to produce the XML file is
accessible. However, right now, this is not yet documented, but we plan
to add a table with the data. For a reader of the source code that is
familiar with Jinja2, however, it will be easy to do it now already.
If you have a template, you can use it like this
``--report-template=your_template.rst.j2:your_report.rst`` and of
course, the usage of restructured text, is only an example. You can use
Markdown, your own XML, or whatever you see fit. Nuitka will just expand
the template with the compilation report data.
Currently, the following reports are included in Nuitka. You just use
the name as a filename, and Nuitka will pick that one instead.
+---------------+--------------+--------------------------------------------------------+
| Report Name | Status | Purpose |
+===============+==============+========================================================+
| LicenseReport | experimental | Distributions used in a compilation with license texts |
+---------------+--------------+--------------------------------------------------------+
.. note::
The community can and should contribute more report types and help
enhancing the existing ones for good looks.
*************
Performance
*************
This chapter gives an overview, of what to currently expect in terms of
performance from Nuitka. It's a work in progress and is updated as we
go. The current focus for performance measurements is Python 2.7, but
3.x is going to follow later.
pystone results
===============
The results are the top value from this kind of output, running pystone
1000 times and taking the minimal value. The idea is that the fastest
run is most meaningful, and eliminates usage spikes.
.. code:: bash
echo "Uncompiled Python2"
for i in {1..100}; do BENCH=1 python2 tests/benchmarks/pystone.py ; done | sort -rn | head -n 1
python2 -m nuitka --lto=yes --pgo tests/benchmarks/pystone.py
echo "Compiled Python2"
for i in {1..100}; do BENCH=1 ./pystone.bin ; done | sort -n | head -rn 1
echo "Uncompiled Python3"
for i in {1..100}; do BENCH=1 python3 tests/benchmarks/pystone3.py ; done | sort -rn | head -n 1
python3 -m nuitka --lto=yes --pgo tests/benchmarks/pystone3.py
echo "Compiled Python3"
for i in {1..100}; do BENCH=1 ./pystone3.bin ; done | sort -rn | head -n 1
+-------------------+-------------------+----------------------+---------------------+
| Python | Uncompiled | Compiled LTO | Compiled PGO |
+===================+===================+======================+=====================+
| Debian Python 2.7 | 137497.87 (1.000) | 460995.20 (3.353) | 503681.91 (3.663) |
+-------------------+-------------------+----------------------+---------------------+
| Nuitka Python 2.7 | 144074.78 (1.048) | 479271.51 (3.486) | 511247.44 (3.718) |
+-------------------+-------------------+----------------------+---------------------+
Report issues or bugs
=====================
Should you encounter any issues, bugs, or ideas, please visit the
`Nuitka bug tracker <https://github.com/Nuitka/Nuitka/issues>`__ and
report them.
Best practices for reporting bugs:
- Please always include the following information in your report, for
the underlying Python version. You can easily copy&paste this into
your report. It does contain more information than you think. Do not
write something manually. You may always add, of course,
.. code:: bash
python -m nuitka --version
- Try to make your example minimal. That is, try to remove code that
does not contribute to the issue as much as possible. Ideally, come
up with a small reproducing program that illustrates the issue, using
``print`` with different results when the program runs compiled or
native.
- If the problem occurs spuriously (i.e. not each time), try to set the
environment variable ``PYTHONHASHSEED`` to ``0``, disabling hash
randomization. If that makes the problem go away, try increasing in
steps of 1 to a hash seed value that makes it happen every time,
include it in your report.
- Do not include the created code in your report. Given proper input,
it's redundant, and it's not likely that I will look at it without
the ability to change the Python or Nuitka source and re-run it.
- Do not send screenshots of text, that is bad and lazy. Instead,
capture text outputs from the console.
***************************
Unsupported functionality
***************************
The ``co_code`` attribute of code objects
=========================================
The code objects are empty for native compiled functions. There is no
bytecode with Nuitka's compiled function objects, so there is no way to
provide it.
PDB
===
There is no tracing of compiled functions to attach a debugger to.
Raw data
{
"_id": null,
"home_page": "https://nuitka.net",
"name": "Nuitka",
"maintainer": null,
"docs_url": null,
"requires_python": null,
"maintainer_email": null,
"keywords": "compiler, python, nuitka",
"author": "Kay Hayen",
"author_email": "Kay.Hayen@gmail.com",
"download_url": "https://files.pythonhosted.org/packages/85/d0/715db68f43d29e8c54033523093f152776f3c9474334c5a0b769a3e748d2/Nuitka-2.1.6.tar.gz",
"platform": null,
"description": "####################\n Nuitka User Manual\n####################\n\nThis document is the recommended first read when you start using\n**Nuitka**. On this page, you will learn more about **Nuitka**\nfundamentals, such as license type, use cases, requirements, and\ncredits.\n\n.. contents:: Table of Contents\n :depth: 1\n :local:\n :class: page-toc\n\nNuitka is **the** Python compiler. It is written in Python. It is a\nseamless replacement or extension to the Python interpreter and compiles\n**every** construct that Python 2 (2.6, 2.7) and Python 3 (3.4 - 3.11)\nhave, when itself run with that Python version.\n\nIt then executes uncompiled code and compiled code together in an\nextremely compatible manner.\n\nYou can use all Python library modules and all extension modules freely.\n\nNuitka translates the Python modules into a C level program that then\nuses ``libpython`` and static C files of its own to execute in the same\nway as CPython does.\n\nAll optimization is aimed at avoiding overhead, where it's unnecessary.\nNone is aimed at removing compatibility, although slight improvements\nwill occasionally be done, where not every bug of standard Python is\nemulated, e.g. more complete error messages are given, but there is a\nfull compatibility mode to disable even that.\n\n**************\n Requirements\n**************\n\nTo ensure smooth operation of **Nuitka**, make sure to follow system\nrequirements, that include the following components:\n\n :depth: 1\n :local:\n\nC Compiler\n==========\n\nYou need a C compiler with support for C11 or alternatively a C++\ncompiler for C++03 [#]_.\n\nCurrently, this means, you need to use one of these compilers:\n\n- The MinGW64 C11 compiler, on Windows, must be based on gcc 11.2 or\n higher. It will be *automatically* downloaded if no usable C compiler\n is found, which is the recommended way of installing it, as Nuitka\n will also upgrade it for you.\n\n- Visual Studio 2022 or higher on Windows [#]_. English language pack\n for best results (Nuitka filters away garbage outputs, but only for\n English language). It will be used by default if installed.\n\n- On all other platforms, the ``gcc`` compiler of at least version 5.1,\n and below that the ``g++`` compiler of at least version 4.4 as an\n alternative.\n\n- The ``clang`` compiler on macOS X and most FreeBSD architectures.\n\n- On Windows, the ``clang-cl`` compiler on Windows can be used if\n provided by the Visual Studio installer.\n\n.. [#]\n\n Support for this C11 is given with gcc 5.x or higher or any clang\n version.\n\n The older MSVC compilers don't do it yet. But as a workaround, with\n Python 3.10 or older, the C++03 language standard is significantly\n overlapping with C11, it is then used instead.\n\n.. [#]\n\n Download for free from\n https://www.visualstudio.com/en-us/downloads/download-visual-studio-vs.aspx\n (the community editions work just fine).\n\n The latest version is recommended, but not required. On the other hand,\n there is no need to except to support pre-Windows 10 versions, and they\n might work for you, but support of these configurations is only\n available to commercial users.\n\nPython\n======\n\n**Python 2** (2.6, 2.7) and **Python 3** (3.4 \u2014 3.11) are supported. If\nat any moment, there is a stable Python release that is not in this\nlist, rest assured it is being worked on and will be added.\n\n.. important::\n\n For Python 3.4 and *only* that version, we need other Python version\n as a *compile time* dependency.\n\n Nuitka itself is fully compatible with all listed versions, but Scons\n as an internally used tool is not.\n\n For these versions, you *need* a Python2 or Python 3.5 or higher\n installed as well, but only during the compile time. That is for use\n with Scons (which orchestrates the C compilation), which does not\n support the same Python versions as Nuitka.\n\n In addition, on Windows, Python2 cannot be used because ``clcache``\n does not work with it, there a Python 3.5 or higher needs to be\n installed.\n\n Nuitka finds these needed Python versions (e.g. on Windows via\n registry) and you shouldn't notice it as long as they are installed.\n\n Increasingly, other functionality is available when another Python\n has a certain package installed. For example, onefile compression\n will work for a Python 2.x when another Python is found that has the\n ``zstandard`` package installed.\n\n.. admonition:: Moving binaries to other machines\n\n The created binaries can be made executable independent of the Python\n installation, with ``--standalone`` and ``--onefile`` options.\n\n.. admonition:: Binary filename suffix\n\n The created binaries have an ``.exe`` suffix on Windows. On other\n platforms they have no suffix for standalone mode, or ``.bin``\n suffix, that you are free to remove or change, or specify with the\n ``-o`` option.\n\n The suffix for acceleration mode is added just to be sure that the\n original script name and the binary name do not ever collide, so we\n can safely overwrite the binary without destroying the original\n source file.\n\n.. admonition:: It **has to** be CPython, Anaconda Python, or Homebrew\n\n You need the standard Python implementation, called \"CPython\", to\n execute Nuitka because it is closely tied to implementation details\n of it.\n\n.. admonition:: It **cannot be** from the Windows app store\n\n It is known that Windows app store Python definitely does not work,\n it's checked against.\n\n.. admonition:: It **cannot be** pyenv on macOS\n\n It is known that macOS \"pyenv\" does **not** work. Use Homebrew\n instead for self compiled Python installations. But note that\n standalone mode will be worse on these platforms and not be as\n backward compatible with older macOS versions.\n\nOperating System\n================\n\nSupported Operating Systems: Linux, FreeBSD, NetBSD, macOS, and Windows\n(32 bits/64 bits/ARM).\n\nOthers will work as well. The portability is expected to be generally\ngood, but the e.g. Nuitka's internal Scons usage may have to be adapted\nor need flags passed. Make sure to match Python and C compiler\narchitecture, or else you will get cryptic error messages.\n\nArchitecture\n============\n\nSupported Architectures are x86, x86_64 (amd64), and arm, likely many,\nmany more.\n\nOther architectures are expected to also work, out of the box, as Nuitka\nis generally not using any hardware specifics. These are just the ones\ntested and known to be good. Feedback is welcome. Generally, the\narchitectures that Debian supports can be considered good and tested,\ntoo.\n\n*******\n Usage\n*******\n\nCommand Line\n============\n\nThe recommended way of executing Nuitka is ``<the_right_python> -m\nnuitka`` to be absolutely certain which Python interpreter you are\nusing, so it is easier to match with what Nuitka has.\n\nThe next best way of executing Nuitka bare that is from a source\ncheckout or archive, with no environment variable changes, most\nnoteworthy, you do not have to mess with ``PYTHONPATH`` at all for\nNuitka. You just execute the ``nuitka`` and ``nuitka-run`` scripts\ndirectly without any changes to the environment. You may want to add the\n``bin`` directory to your ``PATH`` for your convenience, but that step\nis optional.\n\nMoreover, if you want to execute with the right interpreter, in that\ncase, be sure to execute ``<the_right_python> bin/nuitka`` and be good.\n\n.. admonition:: Pick the right Interpreter\n\n If you encounter a ``SyntaxError`` you absolutely most certainly have\n picked the wrong interpreter for the program you are compiling.\n\nNuitka has a ``--help`` option to output what it can do:\n\n.. code:: bash\n\n nuitka --help\n\nThe ``nuitka-run`` command is the same as ``nuitka``, but with a\ndifferent default. It tries to compile *and* directly execute a Python\nscript:\n\n.. code:: bash\n\n nuitka-run --help\n\nThis option that is different is ``--run``, and passing on arguments\nafter the first non-option to the created binary, so it is somewhat more\nsimilar to what plain ``python`` will do.\n\nInstallation\n============\n\nFor most systems, there will be packages on the `download page\n<https://nuitka.net/doc/download.html>`__ of Nuitka. But you can also\ninstall it from source code as described above, but also like any other\nPython program it can be installed via the normal ``python setup.py\ninstall`` routine.\n\nNotice for integration with GitHub workflows there is this\n`Nuitka-Action <https://github.com/Nuitka/Nuitka-Action>`__ that you\nshould use that makes it really easy to integrate. You ought to start\nwith a local compilation though, but this will be easiest for cross\nplatform compilation with Nuitka.\n\nLicense\n=======\n\nNuitka is licensed under the Apache License, Version 2.0; you may not\nuse it except in compliance with the License.\n\nYou may obtain a copy of the License at\nhttp://www.apache.org/licenses/LICENSE-2.0\n\nUnless required by applicable law or agreed to in writing, software\ndistributed under the License is distributed on an \"AS IS\" BASIS,\nWITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\nSee the License for the specific language governing permissions and\nlimitations under the License.\n\n*************************************\n Tutorial Setup and build on Windows\n*************************************\n\nThis is basic steps if you have nothing installed, of course if you have\nany of the parts, just skip it.\n\nSetup\n=====\n\nInstall Python\n--------------\n\n- Download and install Python from\n https://www.python.org/downloads/windows\n\n- Select one of ``Windows x86-64 web-based installer`` (64 bits Python,\n recommended) or ``x86 executable`` (32 bits Python) installer.\n\n- Verify it's working using command ``python --version``.\n\nInstall Nuitka\n--------------\n\n- ``python -m pip install nuitka``\n\n- Verify using command ``python -m nuitka --version``\n\nWrite some code and test\n========================\n\nCreate a folder for the Python code\n-----------------------------------\n\n- ``mkdir`` HelloWorld\n\n- make a python file named **hello.py**\n\n.. code:: python\n\n def talk(message):\n return \"Talk \" + message\n\n\n def main():\n print(talk(\"Hello World\"))\n\n\n if __name__ == \"__main__\":\n main()\n\nTest your program\n-----------------\n\nDo as you normally would. Running Nuitka on code that works incorrectly\nis not easier to debug.\n\n.. code:: bash\n\n python hello.py\n\n----\n\nBuild it using\n--------------\n\n.. code:: bash\n\n python -m nuitka hello.py\n\n.. note::\n\n This will prompt you to download a C caching tool (to speed up\n repeated compilation of generated C code) and a MinGW64 based C\n compiler, unless you have a suitable MSVC installed. Say ``yes`` to\n both those questions.\n\nRun it\n------\n\nExecute the ``hello.exe`` created near ``hello.py``.\n\nDistribute\n----------\n\nTo distribute, build with ``--standalone`` option, which will not output\na single executable, but a whole folder. Copy the resulting\n``hello.dist`` folder to the other machine and run it.\n\nYou may also try ``--onefile`` which does create a single file, but make\nsure that the mere standalone is working, before turning to it, as it\nwill make the debugging only harder, e.g. in case of missing data files.\n\n***********\n Use Cases\n***********\n\nUse Case 1 \u2014 Program compilation with all modules embedded\n==========================================================\n\nIf you want to compile a whole program recursively, and not only the\nsingle file that is the main program, do it like this:\n\n.. code:: bash\n\n python -m nuitka --follow-imports program.py\n\n.. note::\n\n There are more fine-grained controls than ``--follow-imports``\n available. Consider the output of ``nuitka --help``. Including fewer\n modules into the compilation, but instead using normal Python for it,\n will make it faster to compile.\n\nIn case you have a source directory with dynamically loaded files, i.e.\none which cannot be found by recursing after normal import statements\nvia the ``PYTHONPATH`` (which would be the recommended way), you can\nalways require that a given directory shall also be included in the\nexecutable:\n\n.. code:: bash\n\n python -m nuitka --follow-imports --include-plugin-directory=plugin_dir program.py\n\n.. note::\n\n If you don't do any dynamic imports, simply setting your\n ``PYTHONPATH`` at compilation time is what you should do.\n\n Use ``--include-plugin-directory`` only if you make ``__import__()``\n calls that Nuitka cannot predict, and that come from a directory, for\n everything from your Python installation, use ``--include-module`` or\n ``--include-package``.\n\n.. note::\n\n The resulting filename will be ``program.exe`` on Windows,\n ``program.bin`` on other platforms, but ``--output-filename`` allows\n changing that.\n\n.. note::\n\n The resulting binary still depends on CPython and used C extension\n modules being installed.\n\n If you want to be able to copy it to another machine, use\n ``--standalone`` and copy the created ``program.dist`` directory and\n execute the ``program.exe`` (Windows) or ``program`` (other\n platforms) put inside.\n\nUse Case 2 \u2014 Extension Module compilation\n=========================================\n\nIf you want to compile a single extension module, all you have to do is\nthis:\n\n.. code:: bash\n\n python -m nuitka --module some_module.py\n\nThe resulting file ``some_module.so`` can then be used instead of\n``some_module.py``.\n\n.. important::\n\n The filename of the produced extension module must not be changed as\n Python insists on a module name derived function as an entry point,\n in this case ``PyInit_some_module`` and renaming the file will not\n change that. Match the filename of the source code to what the binary\n name should be.\n\n.. note::\n\n If both the extension module and the source code of it are in the\n same directory, the extension module is loaded. Changes to the source\n code only have effect once you recompile.\n\n.. note::\n\n The option ``--follow-import-to`` works as well, but the included\n modules will only become importable *after* you imported the\n ``some_module`` name. If these kinds of imports are invisible to\n Nuitka, e.g. dynamically created, you can use ``--include-module`` or\n ``--include-package`` in that case, but for static imports it should\n not be needed.\n\n.. note::\n\n An extension module can never include other extension modules. You\n will have to create a wheel for this to be doable.\n\n.. note::\n\n The resulting extension module can only be loaded into a CPython of\n the same version and doesn't include other extension modules.\n\nUse Case 3 \u2014 Package compilation\n================================\n\nIf you need to compile a whole package and embed all modules, that is\nalso feasible, use Nuitka like this:\n\n.. code:: bash\n\n python -m nuitka --module some_package --include-package=some_package\n\n.. note::\n\n The inclusion of the package contents needs to be provided manually;\n otherwise, the package is mostly empty. You can be more specific if\n you like, and only include part of it, or exclude part of it, e.g.\n with ``--nofollow-import-to='*.tests'`` you would not include the\n unused test part of your code.\n\n.. note::\n\n Data files located inside the package will not be embedded by this\n process, you need to copy them yourself with this approach.\n Alternatively, you can use the `file embedding of Nuitka commercial\n <https://nuitka.net/doc/commercial/protect-data-files.html>`__.\n\nUse Case 4 \u2014 Program Distribution\n=================================\n\nFor distribution to other systems, there is the standalone mode, which\nproduces a folder for which you can specify ``--standalone``.\n\n.. code:: bash\n\n python -m nuitka --standalone program.py\n\nFollowing all imports is default in this mode. You can selectively\nexclude modules by specifically saying ``--nofollow-import-to``, but\nthen an ``ImportError`` will be raised when import of it is attempted at\nprogram run time. This may cause different behavior, but it may also\nimprove your compile time if done wisely.\n\nFor data files to be included, use the option\n``--include-data-files=<source>=<target>`` where the source is a file\nsystem path, but the target has to be specified relative. For the\nstandalone mode, you can also copy them manually, but this can do extra\nchecks, and for the onefile mode, there is no manual copying possible.\n\nTo copy some or all file in a directory, use the option\n``--include-data-files=/etc/*.txt=etc/`` where you get to specify shell\npatterns for the files, and a subdirectory where to put them, indicated\nby the trailing slash.\n\n.. important::\n\n Nuitka does not consider data files code, do not include DLLs, or\n Python files as data files, and expect them to work, they will not,\n unless you really know what you are doing.\n\nIn the following, non-code data files are all files, not matching on of\nthese criterions.\n\n+------------+----------------------------------------------------------------------------------------+--------------------------------------------------------------------------------------------------------+\n| Suffix | Rationale | Solution |\n+============+========================================================================================+========================================================================================================+\n| ``.py`` | Nuitka trims even the stdlib modules to be included. If it doesn't see Python code, | Use ``--include-module`` on them instead |\n| | there is no dependencies analyzed, and as a result it will just not work. | |\n+------------+----------------------------------------------------------------------------------------+--------------------------------------------------------------------------------------------------------+\n| ``.pyc`` | Same as ``.py``. | Use ``--include-module`` on them from their source code instead. |\n+------------+----------------------------------------------------------------------------------------+--------------------------------------------------------------------------------------------------------+\n| ``.pyo`` | Same as ``.pyc``. | Use ``--include-module`` on them from their source code instead. |\n+------------+----------------------------------------------------------------------------------------+--------------------------------------------------------------------------------------------------------+\n| ``.pyw`` | Same as ``.py``. | For including multiple programs, use multiple ``--main`` arguments instead. |\n+------------+----------------------------------------------------------------------------------------+--------------------------------------------------------------------------------------------------------+\n| ``.pyi`` | These are ignored, because they are code-like and not needed at run time. For the | Raise an issue if 3rd part software needs it. |\n| | ``lazy`` package that actually would depend on them, we made a compile time solution | |\n| | that removes the need. | |\n+------------+----------------------------------------------------------------------------------------+--------------------------------------------------------------------------------------------------------+\n| ``.pyx`` | These are ignored, because they are Cython source code not used at run time | |\n+------------+----------------------------------------------------------------------------------------+--------------------------------------------------------------------------------------------------------+\n| ``.dll`` | These are ignored, since they **usually** are not data files. For the cases where 3rd | Create Nuitka Package configuration for those, with ``dll`` section for the package that uses them. |\n| | party packages do actually used them as data, e.g. ``.NET`` packages, we solve that in | For rare cases, data-files section with special configuration might be the correct thing to do. |\n| | package configuration for it. | |\n+------------+----------------------------------------------------------------------------------------+--------------------------------------------------------------------------------------------------------+\n| ``.dylib`` | These are ignored, since they macOS extension modules or DLLs. | Need to add configuration with ``dll`` section or ``depends`` that are missing |\n+------------+----------------------------------------------------------------------------------------+--------------------------------------------------------------------------------------------------------+\n| ``.so`` | These are ignored, since they Linux, BSD, etc. extension modules or DLLs. | Need to add configuration with ``dll`` section or ``depends`` that are missing |\n+------------+----------------------------------------------------------------------------------------+--------------------------------------------------------------------------------------------------------+\n| ``.exe`` | The are binaries to Windows. | You can add Nuitka Package configuration to include those as DLLs and mark them as ``executable: yes`` |\n+------------+----------------------------------------------------------------------------------------+--------------------------------------------------------------------------------------------------------+\n| ``.bin`` | The are binaries to non-Windows, otherwise same as ``.exe``. | |\n+------------+----------------------------------------------------------------------------------------+--------------------------------------------------------------------------------------------------------+\n\nAlso folders are ignored, these are ``site-packages``, ``dist-packages``\nand ``vendor-packages`` which would otherwise include a full virtualenv,\nwhich is never a good thing to happen. And the ``__pycache__`` folder is\nalso always ignored. On non-MacOS the file ``.DS_Store`` is ignored too,\nand ``py.typed`` folders have only meaning to IDEs, and are ignored like\n``.pyi`` files .\n\nTo copy a whole folder with all non-code files, you can use\n``--include-data-dir=/path/to/images=images`` which will place those in\nthe destination, and if you want to use the ``--noinclude-data-files``\noption to remove them. Code files are as detailed above DLLs,\nexecutables, Python files, etc. and will be ignored. For those you can\nuse the ``--include-data-files=/binaries/*.exe=binary/`` form to force\nthem, but that is not recommended and known to cause issues at run-time.\n\nFor package data, there is a better way, namely using\n``--include-package-data``, which detects all non-code data files of\npackages automatically and copies them over. It even accepts patterns in\na shell style. It spares you the need to find the package directory\nyourself and should be preferred whenever available. Functionally it's\nvery similar to ``--include-data-dir`` but it has the benefit to locate\nthe correct folder for you.\n\nWith data files, you are largely on your own. Nuitka keeps track of ones\nthat are needed by popular packages, but it might be incomplete. Raise\nissues if you encounter something in these. Even better, raise PRs with\nenhancements to the Nuitka package configuration. With want 3rd party\nsoftware to just work out of the box.\n\nWhen that is working, you can use the onefile mode if you so desire.\n\n.. code:: bash\n\n python -m nuitka --onefile program.py\n\nThis will create a single binary, that extracts itself on the target,\nbefore running the program. But notice, that accessing files relative to\nyour program is impacted, make sure to read the section `Onefile:\nFinding files`_ as well.\n\n.. code:: bash\n\n # Create a binary that unpacks into a temporary folder\n python -m nuitka --onefile program.py\n\n.. note::\n\n There are more platform-specific options, e.g. related to icons,\n splash screen, and version information, consider the ``--help``\n output for the details of these and check the section Tweaks_.\n\nFor the unpacking, by default a unique user temporary path one is used,\nand then deleted, however this default\n``--onefile-tempdir-spec=\"{TEMP}/onefile_{PID}_{TIME}\"`` can be\noverridden with a path specification that is using then using a cached\npath, avoiding repeated unpacking, e.g. with\n``--onefile-tempdir-spec=\"{CACHE_DIR}/{COMPANY}/{PRODUCT}/{VERSION}\"``\nwhich uses version information, and user-specific cache directory.\n\n.. note::\n\n Using cached paths will be relevant, e.g. when Windows Firewall comes\n into play because otherwise, the binary will be a different one to it\n each time it is run.\n\nCurrently, these expanded tokens are available:\n\n+----------------+-----------------------------------------------------------+---------------------------------------+\n| Token | What this Expands to | Example |\n+================+===========================================================+=======================================+\n| {TEMP} | User temporary file directory | C:\\\\Users\\\\...\\\\AppData\\\\Locals\\\\Temp |\n+----------------+-----------------------------------------------------------+---------------------------------------+\n| {PID} | Process ID | 2772 |\n+----------------+-----------------------------------------------------------+---------------------------------------+\n| {TIME} | Time in seconds since the epoch. | 1299852985 |\n+----------------+-----------------------------------------------------------+---------------------------------------+\n| {PROGRAM} | Full program run-time filename of executable. | C:\\\\SomeWhere\\\\YourOnefile.exe |\n+----------------+-----------------------------------------------------------+---------------------------------------+\n| {PROGRAM_BASE} | No-suffix of run-time filename of executable. | C:\\\\SomeWhere\\\\YourOnefile |\n+----------------+-----------------------------------------------------------+---------------------------------------+\n| {CACHE_DIR} | Cache directory for the user. | C:\\\\Users\\\\SomeBody\\\\AppData\\\\Local |\n+----------------+-----------------------------------------------------------+---------------------------------------+\n| {COMPANY} | Value given as ``--company-name`` | YourCompanyName |\n+----------------+-----------------------------------------------------------+---------------------------------------+\n| {PRODUCT} | Value given as ``--product-name`` | YourProductName |\n+----------------+-----------------------------------------------------------+---------------------------------------+\n| {VERSION} | Combination of ``--file-version`` & ``--product-version`` | 3.0.0.0-1.0.0.0 |\n+----------------+-----------------------------------------------------------+---------------------------------------+\n| {HOME} | Home directory for the user. | /home/somebody |\n+----------------+-----------------------------------------------------------+---------------------------------------+\n| {NONE} | When provided for file outputs, ``None`` is used | see notice below |\n+----------------+-----------------------------------------------------------+---------------------------------------+\n| {NULL} | When provided for file outputs, ``os.devnull`` is used | see notice below |\n+----------------+-----------------------------------------------------------+---------------------------------------+\n\n.. important::\n\n It is your responsibility to make the path provided unique, on\n Windows a running program will be locked, and while using a fixed\n folder name is possible, it can cause locking issues in that case,\n where the program gets restarted.\n\n Usually, you need to use ``{TIME}`` or at least ``{PID}`` to make a\n path unique, and this is mainly intended for use cases, where e.g.\n you want things to reside in a place you choose or abide your naming\n conventions.\n\n.. important::\n\n For disabling output and stderr with ``--force-stdout-spec`` and\n ``--force-stderr-spec`` the values ``{NONE}`` and ``{NULL}`` achieve\n it, but with different effect. With ``{NONE}``, the corresponding\n handle becomes ``None``. As a result, e.g. ``sys.stdout`` will be\n ``None``, which is different from ``{NULL}`` where it will be backed\n by a file pointing to ``os.devnull``, i.e. you can write to it.\n\n With ``{NONE}``, you may e.g. get ``RuntimeError: lost sys.stdout``\n in case it does get used; with ``{NULL}`` that never happens.\n However, some libraries handle this as input for their logging\n mechanism, and on Windows this is how you are compatible with\n ``pythonw.exe`` which is behaving like ``{NONE}``.\n\nUse Case 5 \u2014 Setuptools Wheels\n==============================\n\nIf you have a ``setup.py``, ``setup.cfg`` or ``pyproject.toml`` driven\ncreation of wheels for your software in place, putting Nuitka to use is\nextremely easy.\n\nLet's start with the most common ``setuptools`` approach, you can,\nhaving Nuitka installed of course, simply execute the target\n``bdist_nuitka`` rather than the ``bdist_wheel``. It takes all the\noptions and allows you to specify some more, that are specific to\nNuitka.\n\n.. code:: python\n\n # For setup.py if you don't use other build systems:\n setup(\n # Data files are to be handled by setuptools and not Nuitka\n package_data={\"some_package\": [\"some_file.txt\"]},\n ...,\n # This is to pass Nuitka options.\n command_options={\n 'nuitka': {\n # boolean option, e.g. if you cared for C compilation commands\n '--show-scons': True,\n # options without value, e.g. enforce using Clang\n '--clang': None,\n # options with single values, e.g. enable a plugin of Nuitka\n '--enable-plugin': \"pyside2\",\n # options with several values, e.g. avoiding including modules\n '--nofollow-import-to' : [\"*.tests\", \"*.distutils\"],\n },\n },\n )\n\n # For setup.py with other build systems:\n # The tuple nature of the arguments is required by the dark nature of\n # \"setuptools\" and plugins to it, that insist on full compatibility,\n # e.g. \"setuptools_rust\"\n\n setup(\n # Data files are to be handled by setuptools and not Nuitka\n package_data={\"some_package\": [\"some_file.txt\"]},\n ...,\n # This is to pass Nuitka options.\n ...,\n command_options={\n 'nuitka': {\n # boolean option, e.g. if you cared for C compilation commands\n '--show-scons': (\"setup.py\", True),\n # options without value, e.g. enforce using Clang\n '--clang': (\"setup.py\", None),\n # options with single values, e.g. enable a plugin of Nuitka\n '--enable-plugin': (\"setup.py\", \"pyside2\"),\n # options with several values, e.g. avoiding including modules\n '--nofollow-import-to' : (\"setup.py\", [\"*.tests\", \"*.distutils\"]),\n }\n },\n )\n\nIf for some reason, you cannot or do not want to change the target, you\ncan add this to your ``setup.py``.\n\n.. code:: python\n\n # For setup.py\n setup(\n ...,\n build_with_nuitka=True\n )\n\n.. note::\n\n To temporarily disable the compilation, you could the remove above\n line, or edit the value to ``False`` by or take its value from an\n environment variable if you so choose, e.g.\n ``bool(os.getenv(\"USE_NUITKA\", \"True\"))``. This is up to you.\n\nOr you could put it in your ``setup.cfg``\n\n.. code:: toml\n\n [metadata]\n build_with_nuitka = true\n\nAnd last, but not least, Nuitka also supports the new ``build`` meta, so\nwhen you have a ``pyproject.toml`` already, simple replace or add this\nvalue:\n\n.. code:: toml\n\n [build-system]\n requires = [\"setuptools>=42\", \"wheel\", \"nuitka\", \"toml\"]\n build-backend = \"nuitka.distutils.Build\"\n\n # Data files are to be handled by setuptools and not Nuitka\n [tool.setuptools.package-data]\n some_package = ['data_file.txt']\n\n [tool.nuitka]\n # These are not recommended, but they make it obvious to have effect.\n\n # boolean option, e.g. if you cared for C compilation commands, leading\n # dashes are omitted\n show-scons = true\n\n # options with single values, e.g. enable a plugin of Nuitka\n enable-plugin = \"pyside2\"\n\n # options with several values, e.g. avoiding including modules, accepts\n # list argument.\n nofollow-import-to = [\"*.tests\", \"*.distutils\"]\n\n.. note::\n\n For the ``nuitka`` requirement above absolute paths like\n ``C:\\Users\\...\\Nuitka`` will also work on Linux, use an absolute path\n with *two* leading slashes, e.g. ``//home/.../Nuitka``.\n\n.. note::\n\n Whatever approach you take, data files in these wheels are not\n handled by Nuitka at all, but by setuptools. You can, however, use\n the data file embedding of Nuitka commercial. In that case, you\n actually would embed the files inside the extension module itself,\n and not as a file in the wheel.\n\nUse Case 6 \u2014 Multidist\n======================\n\nIf you have multiple programs, that each should be executable, in the\npast you had to compile multiple times, and deploy all of these. With\nstandalone mode, this, of course, meant that you were fairly wasteful,\nas sharing the folders could be done, but wasn't really supported by\nNuitka.\n\nEnter ``Multidist``. There is an option ``--main`` that replaces or adds\nto the positional argument given. And it can be given multiple times.\nWhen given multiple times, Nuitka will create a binary that contains the\ncode of all the programs given, but sharing modules used in them. They\ntherefore do not have to be distributed multiple times.\n\nLet's call the basename of the main path, and entry point. The names of\nthese must, of course, be different. Then the created binary can execute\neither entry point, and will react to what ``sys.argv[0]`` appears to\nit. So if executed in the right way (with something like ``subprocess``\nor OS API you can control this name), or by renaming or copying the\nbinary, or symlinking to it, you can then achieve the miracle.\n\nThis allows to combine very different programs into one.\n\n.. note::\n\n This feature is still experimental. Use with care and report your\n findings should you encounter anything that is undesirable behavior\n\nThis mode works with standalone, onefile, and mere acceleration. It does\nnot work with module mode.\n\nUse Case 7 \u2014 Building with GitHub Workflows\n===========================================\n\nFor integration with GitHub workflows there is this `Nuitka-Action\n<https://github.com/Nuitka/Nuitka-Action>`__ that you should use that\nmakes it really easy to integrate. You ought to start with a local\ncompilation though, but this will be easiest for cross platform\ncompilation with Nuitka.\n\nThis is an example workflow that builds on all 3 OSes\n\n.. code:: yaml\n\n jobs:\n build:\n strategy:\n matrix:\n os: [macos-latest, ubuntu-latest, windows-latest]\n\n runs-on: ${{ matrix.os }}\n\n steps:\n - name: Check-out repository\n uses: actions/checkout@v3\n\n - name: Setup Python\n uses: actions/setup-python@v4\n with:\n python-version: '3.10'\n cache: 'pip'\n cache-dependency-path: |\n **/requirements*.txt\n\n - name: Install your Dependencies\n run: |\n pip install -r requirements.txt -r requirements-dev.txt\n\n - name: Build Executable with Nuitka\n uses: Nuitka/Nuitka-Action@main\n with:\n nuitka-version: main\n script-name: your_main_program.py\n # many more Nuitka options available, see action doc, but it's best\n # to use nuitka-project: options in your code, so e.g. you can make\n # a difference for macOS and create an app bundle there.\n onefile: true\n\n - name: Upload Artifacts\n uses: actions/upload-artifact@v3\n with:\n name: ${{ runner.os }} Build\n path: | # match what's created for the 3 OSes\n build/*.exe\n build/*.bin\n build/*.app/**/*\n\nIf you app is a GUI, e.g. ``your_main_program.py`` should contain these\ncomments as explained in `Nuitka Options in the code`_ since on macOS\nthis should then be a bundle.\n\n.. code:: python\n\n # Compilation mode, standalone everywhere, except on macOS there app bundle\n # nuitka-project-if: {OS} in (\"Windows\", \"Linux\", \"FreeBSD\"):\n # nuitka-project: --onefile\n # nuitka-project-if: {OS} == \"Darwin\":\n # nuitka-project: --standalone\n # nuitka-project: --macos-create-app-bundle\n #\n # Debugging options, controlled via environment variable at compile time.\n # nuitka-project-if: os.getenv(\"DEBUG_COMPILATION\", \"no\") == \"yes\"\n # nuitka-project: --enable-console\n # nuitka-project-else:\n # nuitka-project: --disable-console\n\n********\n Tweaks\n********\n\nIcons\n=====\n\nFor good looks, you may specify icons. On Windows, you can provide an\nicon file, a template executable, or a PNG file. All of these will work\nand may even be combined:\n\n.. code:: bash\n\n # These create binaries with icons on Windows\n python -m nuitka --onefile --windows-icon-from-ico=your-icon.png program.py\n python -m nuitka --onefile --windows-icon-from-ico=your-icon.ico program.py\n python -m nuitka --onefile --windows-icon-template-exe=your-icon.ico program.py\n\n # These create application bundles with icons on macOS\n python -m nuitka --macos-create-app-bundle --macos-app-icon=your-icon.png program.py\n python -m nuitka --macos-create-app-bundle --macos-app-icon=your-icon.icns program.py\n\n.. note::\n\n With Nuitka, you do not have to create platform-specific icons, but\n instead it will convert e.g. PNG, but also other formats on the fly\n during the build.\n\nMacOS Entitlements\n==================\n\nEntitlements for an macOS application bundle can be added with the\noption, ``--macos-app-protected-resource``, all values are listed on\n`this page from Apple\n<https://developer.apple.com/documentation/bundleresources/information_property_list/protected_resources>`__\n\nAn example value would be\n``--macos-app-protected-resource=NSMicrophoneUsageDescription:Microphone\naccess`` for requesting access to a Microphone. After the colon, the\ndescriptive text is to be given.\n\n.. note::\n\n Beware that in the likely case of using spaces in the description\n part, you need to quote it for your shell to get through to Nuitka\n and not be interpreted as Nuitka arguments.\n\nConsole Window\n==============\n\nOn Windows, the console is opened by programs unless you say so. Nuitka\ndefaults to this, effectively being only good for terminal programs, or\nprograms where the output is requested to be seen. There is a difference\nin ``pythonw.exe`` and ``python.exe`` along those lines. This is\nreplicated in Nuitka with the option ``--disable-console``. Nuitka\nrecommends you to consider this in case you are using ``PySide6`` e.g.\nand other GUI packages, e.g. ``wx``, but it leaves the decision up to\nyou. In case, you know your program is console application, just using\n``--enable-console`` which will get rid of these kinds of outputs from\nNuitka.\n\n.. note::\n\n The ``pythonw.exe`` is never good to be used with Nuitka, as you\n cannot see its output.\n\nSplash screen\n=============\n\nSplash screens are useful when program startup is slow. Onefile startup\nitself is not slow, but your program may be, and you cannot really know\nhow fast the computer used will be, so it might be a good idea to have\nthem. Luckily, with Nuitka, they are easy to add for Windows.\n\nFor the splash screen, you need to specify it as a PNG file, and then\nmake sure to disable the splash screen when your program is ready, e.g.\nhas completed the imports, prepared the window, connected to the\ndatabase, and wants the splash screen to go away. Here we are using the\nproject syntax to combine the code with the creation, compile this:\n\n.. code:: python\n\n # nuitka-project: --onefile\n # nuitka-project: --onefile-windows-splash-screen-image={MAIN_DIRECTORY}/Splash-Screen.png\n\n # Whatever this is, obviously\n print(\"Delaying startup by 10s...\")\n import time, tempfile, os\n time.sleep(10)\n\n # Use this code to signal the splash screen removal.\n if \"NUITKA_ONEFILE_PARENT\" in os.environ:\n splash_filename = os.path.join(\n tempfile.gettempdir(),\n \"onefile_%d_splash_feedback.tmp\" % int(os.environ[\"NUITKA_ONEFILE_PARENT\"]),\n )\n\n if os.path.exists(splash_filename):\n os.unlink(splash_filename)\n\n print(\"Done... splash should be gone.\")\n ...\n\n # Rest of your program goes here.\n\nReports\n=======\n\nFor analysis of your program and Nuitka packaging, there is the\n`Compilation Report`_ available. You can also make custom reports by\nproviding your template, with a few of them built-in to Nuitka. These\nreports carry all the detail information, e.g. when a module was\nattempted to be imported, but not found, you can see where that happens.\nFor bug reporting, it is very much recommended to provide the report.\n\nVersion Information\n===================\n\nYou can attach copyright and trademark information, company name,\nproduct name, and so on to your compilation. This is then used in\nversion information for the created binary on Windows, or application\nbundle on macOS. If you find something that is lacking, please let us\nknow.\n\n******************\n Typical Problems\n******************\n\nDeployment Mode\n===============\n\nBy default, Nuitka compiles without ``--deployment`` which leaves a set\nof safe guards and helpers on, that are aimed at debugging wrong uses of\nNuitka.\n\nThis is a new feature, and implements a bunch of protections and\nhelpers, that are documented here.\n\nFork bombs (self-execution)\n---------------------------\n\nSo after compilation, ``sys.executable`` is the compiled binary. In case\nof packages like ``multiprocessing``, ``joblib``, or ``loky`` what these\ntypically do is to expect to run from a full ``python`` with\n``sys.executable`` and then to be able to use its options like ``-c\ncommand`` or ``-m module_name`` and then be able to launch other code\ntemporarily or permanently as a service daemon.\n\nWith Nuitka however, this executes your program again, and puts these\narguments, in ``sys.argv`` where you maybe ignore them, and then you\nfork yourself again to launch the helper daemons. Sometimes this ends up\nspawning CPU count processes that spawn CPU count processes that... this\nis called a fork bomb, and with almost all systems, that freezes them\neasily to death.\n\nThat is why e.g. this happens with default Nuitka:\n\n.. code::\n\n ./hello.dist/hello.bin -l fooL -m fooM -n fooN -o fooO -p\n Error, the program tried to call itself with '-m' argument. Disable with '--no-deployment-flag=self-execution'.\n\nYour program may well have its own command line parsing, and not use an\nunsupported package that does attempt to re-execute. In this case, you\nneed at *compile time* to use ``--no-deployment-flag=self-execution``\nwhich disables this specific guard.\n\nMisleading Messages\n-------------------\n\nSome packages output what they think is helpful information about what\nthe reason of a failed import might mean. With compiled programs there\nare very often just plain wrong. We try and repair those in\nnon-deployment mode. Here is an example, where we change a message that\nasks to pip install (which is not the issue) to point the user to the\ninclude command that makes an ``imageio`` plugin work.\n\n.. code:: yaml\n\n - module-name: 'imageio.core.imopen'\n anti-bloat:\n - replacements_plain:\n '`pip install imageio[{config.install_name}]` to install it': '`--include-module={config.module_name}` with Nuitka to include it'\n 'err_type = ImportError': 'err_type = RuntimeError'\n when: 'not deployment'\n\nAnd much more\n-------------\n\nThe deployment mode is relatively new and has constantly more features\nadded, e.g. something for ``FileNotFoundError`` should be coming soon.\n\nDisabling All\n-------------\n\nAll these helpers can of course be disabled at once with\n``--deployment`` but keep in mind that for debugging, you may want to\nre-enable it. You might want to use Nuitka Project options and an\nenvironment variable to make this conditional.\n\nShould you disable them all?\n\nWe believe, disabling should only happen selectively, but with PyPI\nupgrades, your code changes, all of these issues can sneak back in. The\nspace saving of deployment mode is currently negligible, so attempt to\nnot do it, but review what exists, and if you know that it cannot affect\nyou, or if it does, you will not need it. Some of the future ones, will\nclearly be geared at beginner level usage.\n\nWindows Virus scanners\n======================\n\nBinaries compiled on Windows with default settings of Nuitka and no\nfurther actions taken might be recognized by some AV vendors as malware.\nThis is avoidable, but only in Nuitka commercial there is actual support\nand instructions for how to do it, seeing this as a typical commercial\nonly need. https://nuitka.net/doc/commercial.html\n\nLinux Standalone\n================\n\nFor Linux standalone it is pretty difficult to build a binary that works\non other Linux versions. This is mainly because on Linux, much software\nis built specifically targeted to concrete DLLs. Things like glibc used,\nare then encoded into the binary built, and it will not run with an\nolder glibc, just to give one critical example.\n\nThe solution is to build on the oldest OS that you want to see\nsupported. Picking that and setting it up can be tedious, so can be\nlogin, and keeping it secure, as it's something you put your source code\non.\n\nTo aid that, Nuitka commercial has container based builds, that you can\nuse. This uses dedicated optimized Python builds, targets CentOS 7 and\nsupports even newest Pythons and very old OSes that way using recent C\ncompiler chains all turn key solution. The effort needs to be\ncompensated to support Nuitka development for Linux, there you need to\npurchase it https://nuitka.net/doc/commercial.html but even a sponsor\nlicense will be cheaper than doing it yourself.\n\nProgram crashes system (fork bombs)\n===================================\n\nA fork bomb is a program that starts itself over and over. This can\neasily happen, since ``sys.executable`` for compiled programs is not a\nPython interpreter, and packages that try to do multiprocessing in a\nbetter way, often relaunch themselves through this, and Nuitka needs and\ndoes have handling for these with known packages. However, you may\nencounter a situation where the detection of this fails. See deployment\noption above that is needed to disable this protection.\n\nWhen this fork bomb happens easily all memory, all CPU of the system\nthat is available to the user is being used, and even the most powerful\nbuild system will go down in flames sometimes needing a hard reboot.\n\nFor fork bombs, we can use ``--experimental=debug-self-forking`` and see\nwhat it does, and we have a trick, that prevents fork bombs from having\nany actual success in their bombing. Put this at the start of your\nprogram.\n\n.. code:: python\n\n import os, sys\n\n if \"NUITKA_LAUNCH_TOKEN\" not in os.environ:\n sys.exit(\"Error, need launch token or else fork bomb suspected.\")\n else:\n del os.environ[\"NUITKA_LAUNCH_TOKEN\"]\n\nActually Nuitka is trying to get ahold of them without the deployment\noption already, finding \"-c\" and \"-m\" options, but it may not be perfect\nor not work well with a package (anymore).\n\nMemory issues and compiler bugs\n===============================\n\nIn some cases, the C compilers will crash saying they cannot allocate\nmemory or that some input was truncated, or similar error messages,\nclearly from it. These are example error messages, that are a sure sign\nof too low memory, there is no end to them.\n\n.. code::\n\n # gcc\n fatal error: error writing to -: Invalid argument\n Killed signal terminated program\n # MSVC\n fatal error C1002: compiler is out of heap space in pass 2\n fatal error C1001: Internal compiler error\n\nThere are several options you can explore here.\n\nAsk Nuitka to use less memory\n-----------------------------\n\nThere is a dedicated option ``--low-memory`` which influences decisions\nof Nuitka, such that it avoids high usage of memory during compilation\nat the cost of increased compile time.\n\nAvoid 32 bit C compiler/assembler memory limits\n-----------------------------------------------\n\nDo not use a 32 bit compiler, but a 64 bit one. If you are using Python\nwith 32 bits on Windows, you most definitely ought to use MSVC as the C\ncompiler, and not MinGW64. The MSVC is a cross-compiler, and can use\nmore memory than gcc on that platform. If you are not on Windows, that\nis not an option, of course. Also, using the 64 bit Python will work.\n\nUse a minimal virtualenv\n------------------------\n\nWhen you compile from a living installation, that may well have many\noptional dependencies of your software installed. Some software will\nthen have imports on these, and Nuitka will compile them as well. Not\nonly may these be just the troublemakers, they also require more memory,\nso get rid of that. Of course, you do have to check that your program\nhas all the needed dependencies before you attempt to compile, or else\nthe compiled program will equally not run.\n\nUse LTO compilation or not\n--------------------------\n\nWith ``--lto=yes`` or ``--lto=no`` you can switch the C compilation to\nonly produce bytecode, and not assembler code and machine code directly,\nbut make a whole program optimization at the end. This will change the\nmemory usage pretty dramatically, and if your error is coming from the\nassembler, using LTO will most definitely avoid that.\n\nSwitch the C compiler to clang\n------------------------------\n\nPeople have reported that programs that fail to compile with gcc due to\nits bugs or memory usage work fine with clang on Linux. On Windows, this\ncould still be an option, but it needs to be implemented first for the\nautomatic downloaded gcc, that would contain it. Since MSVC is known to\nbe more memory effective anyway, you should go there, and if you want to\nuse Clang, there is support for the one contained in MSVC.\n\nAdd a larger swap file to your embedded Linux\n---------------------------------------------\n\nOn systems with not enough RAM, you need to use swap space. Running out\nof it is possibly a cause, and adding more swap space, or one at all,\nmight solve the issue, but beware that it will make things extremely\nslow when the compilers swap back and forth, so consider the next tip\nfirst or on top of it.\n\nLimit the amount of compilation jobs\n------------------------------------\n\nWith the ``--jobs`` option of Nuitka, it will not start many C compiler\ninstances at once, each competing for the scarce resource of RAM. By\npicking a value of one, only one C compiler instance will be running,\nand on an 8 core system, that reduces the amount of memory by factor 8,\nso that's a natural choice right there.\n\nDynamic ``sys.path``\n====================\n\nIf your script modifies ``sys.path``, e.g. inserts directories with\nsource code relative to it, Nuitka will not be able to see those.\nHowever, if you set the ``PYTHONPATH`` to the resulting value, it will\nbe able to compile it and find the used modules from these paths as\nwell.\n\nManual Python File Loading\n==========================\n\nA very frequent pattern with private code is that it scans plugin\ndirectories of some kind, and e.g. uses ``os.listdir``, then considers\nPython filenames, and then opens a file and does ``exec`` on them. This\napproach works for Python code, but for compiled code, you should use\nthis much cleaner approach, that works for pure Python code and is a lot\nless vulnerable.\n\n.. code:: python\n\n # Using a package name, to locate the plugins. This is also a sane\n # way to organize them into a directory.\n scan_path = scan_package.__path__\n\n for item in pkgutil.iter_modules(scan_path):\n importlib.import_module(scan_package.__name__ + \".\" + item.name)\n\n # You may want to do it recursively, but we don't do this here in\n # this example. If you'd like to, handle that in this kind of branch.\n if item.ispkg:\n ...\n\nMissing data files in standalone\n================================\n\nIf your program fails to find data file, it can cause all kinds of\ndifferent behavior, e.g. a package might complain it is not the right\nversion because a ``VERSION`` file check defaulted to an unknown. The\nabsence of icon files or help texts, may raise strange errors.\n\nOften the error paths for files not being present are even buggy and\nwill reveal programming errors like unbound local variables. Please look\ncarefully at these exceptions, keeping in mind that this can be the\ncause. If your program works without standalone, chances are data files\nmight be the cause.\n\nThe most common error indicating file absence is of course an uncaught\n``FileNotFoundError`` with a filename. You should figure out what\npackage is missing files and then use ``--include-package-data``\n(preferably), or ``--include-data-dir``/``--include-data-files`` to\ninclude them.\n\nMissing DLLs/EXEs in standalone\n===============================\n\nNuitka has plugins that deal with copying DLLs. For NumPy, SciPy,\nTkinter, etc.\n\nThese need special treatment to be able to run on other systems.\nManually copying them is not enough and will give strange errors.\nSometimes newer version of packages, esp. NumPy can be unsupported. In\nthis case, you will have to raise an issue, and use the older one.\n\nIf you want to manually add a DLL or an EXE because it is your project\nonly, you will have to use user Yaml files describing where they can be\nfound. This is described in detail with examples in the `Nuitka Package\nConfiguration <https://nuitka.net/doc/nuitka-package-config.html>`__\npage.\n\nDependency creep in standalone\n==============================\n\nSome packages are a single import, but to Nuitka mean that more than a\nthousand packages (literally) are to be included. The prime example of\nPandas, which does want to plug and use just about everything you can\nimagine. Multiple frameworks for syntax highlighting everything\nimaginable take time.\n\nNuitka will have to learn effective caching to deal with this in the\nfuture. Presently, you will have to deal with huge compilation times for\nthese.\n\nA major weapon in fighting dependency creep should be applied, namely\nthe ``anti-bloat`` plugin, which offers interesting abilities, that can\nbe put to use and block unneeded imports, giving an error for where they\noccur. Use it e.g. like this ``--noinclude-pytest-mode=nofollow\n--noinclude-setuptools-mode=nofollow`` and e.g. also\n``--noinclude-custom-mode=setuptools:error`` to get the compiler to\nerror out for a specific package. Make sure to check its help output. It\ncan take for each module of your choice, e.g. forcing also that e.g.\n``PyQt5`` is considered uninstalled for standalone mode.\n\nIt's also driven by a configuration file, ``anti-bloat.yml`` that you\ncan contribute to, removing typical bloat from packages. Please don't\nhesitate to enhance it and make PRs towards Nuitka with it.\n\nStandalone: Finding files\n=========================\n\nThe standard code that normally works, also works, you should refer to\n``os.path.dirname(__file__)`` or use all the packages like ``pkgutil``,\n``pkg_resources``, ``importlib.resources`` to locate data files near the\nstandalone binary.\n\n.. important::\n\n What you should **not** do, is use the current directory\n ``os.getcwd``, or assume that this is the script directory, e.g. with\n paths like ``data/``.\n\n If you did that, it was never good code. Links, to a program,\n launching from another directory, etc. will all fail in bad ways. Do\n not make assumptions about the directory your program is started\n from.\n\nIn case you mean to refer to the location of the ``.dist`` folder for\nfiles that are to reside near the binary, there is\n``__compiled__.containing_dir`` that also abstracts all differences with\n``--macos-create-app-bundle`` and the ``.app`` folder a having more\nnested structure.\n\n.. code:: python\n\n # This will find a file *near* your app or dist folder\n try:\n open(os.path.join(__compiled__.containing_dir, \"user-provided-file.txt\"))\n except NameError:\n open(os.path.join(os.path.dirname(sys.argv[0]), \"user-provided-file.txt\"))\n\nOnefile: Finding files\n======================\n\nThere is a difference between ``sys.argv[0]`` and ``__file__`` of the\nmain module for the onefile mode, that is caused by using a bootstrap to\na temporary location. The first one will be the original executable\npath, whereas the second one will be the temporary or permanent path the\nbootstrap executable unpacks to. Data files will be in the later\nlocation, your original environment files will be in the former\nlocation.\n\nGiven 2 files, one which you expect to be near your executable, and one\nwhich you expect to be inside the onefile binary, access them like this.\n\n.. code:: python\n\n # This will find a file *near* your onefile.exe\n open(os.path.join(os.path.dirname(sys.argv[0]), \"user-provided-file.txt\"))\n # This will find a file *inside* your onefile.exe\n open(os.path.join(os.path.dirname(__file__), \"user-provided-file.txt\"))\n\n # This will find a file *near* your onefile binary and work for standalone too\n try:\n open(os.path.join(__compiled__.containing_dir, \"user-provided-file.txt\"))\n except NameError:\n open(os.path.join(os.path.dirname(sys.argv[0]), \"user-provided-file.txt\"))\n\nWindows Programs without console give no errors\n===============================================\n\nFor debugging purposes, remove ``--disable-console`` or use the options\n``--force-stdout-spec`` and ``--force-stderr-spec`` with paths as\ndocumented for ``--onefile-tempdir-spec`` above. These can be relative\nto the program or absolute, so you can see the outputs given.\n\nDeep copying uncompiled functions\n=================================\n\nSometimes people use this kind of code, which for packages on PyPI, we\ndeal with by doing source code patches on the fly. If this is in your\nown code, here is what you can do:\n\n.. code:: python\n\n def binder(func, name):\n result = types.FunctionType(func.__code__, func.__globals__, name=func.__name__, argdefs=func.__defaults__, closure=func.__closure__)\n result = functools.update_wrapper(result, func)\n result.__kwdefaults__ = func.__kwdefaults__\n result.__name__ = name\n return result\n\nCompiled functions cannot be used to create uncompiled ones from, so the\nabove code will not work. However, there is a dedicated ``clone``\nmethod, that is specific to them, so use this instead.\n\n.. code:: python\n\n def binder(func, name):\n try:\n result = func.clone()\n except AttributeError:\n result = types.FunctionType(func.__code__, func.__globals__, name=func.__name__, argdefs=func.__defaults__, closure=func.__closure__)\n result = functools.update_wrapper(result, func)\n result.__kwdefaults__ = func.__kwdefaults__\n\n result.__name__ = name\n return result\n\nModules: Extension modules are not executable directly\n======================================================\n\nA package can be compiled with Nuitka, no problem, but when it comes to\nexecuting it, ``python -m compiled_module`` is not going to work and\ngive the error ``No code object available for AssertsTest`` because the\ncompiled module is not source code, and Python will not just load it.\nThe closest would be ``python -c \"import compile_module\"`` and you might\nhave to call the main function yourself.\n\nTo support this, the CPython ``runpy`` and/or ``ExtensionFileLoader``\nwould need improving such that Nuitka could supply its compiled module\nobject for Python to use.\n\n******\n Tips\n******\n\nNuitka Options in the code\n==========================\n\nOne clean way of providing options to Nuitka, that you will always use\nfor your program, is to put them into the main file you compile. There\nis even support for conditional options, and options using pre-defined\nvariables, this is an example:\n\n.. code:: python\n\n # Compilation mode, support OS-specific options\n # nuitka-project-if: {OS} in (\"Windows\", \"Linux\", \"Darwin\", \"FreeBSD\"):\n # nuitka-project: --onefile\n # nuitka-project-else:\n # nuitka-project: --standalone\n\n # The PySide2 plugin covers qt-plugins\n # nuitka-project: --enable-plugin=pyside2\n # nuitka-project: --include-qt-plugins=qml\n\nThe comments must be at the start of lines, and indentation inside of\nthem is to be used, to end a conditional block, much like in Python.\nThere are currently no other keywords than the used ones demonstrated\nabove.\n\nYou can put arbitrary Python expressions there, and if you wanted to\ne.g. access a version information of a package, you could simply use\n``__import__(\"module_name\").__version__`` if that would be required to\ne.g. enable or disable certain Nuitka settings. The only thing Nuitka\ndoes that makes this not Python expressions, is expanding ``{variable}``\nfor a pre-defined set of variables:\n\nTable with supported variables:\n\n+------------------+--------------------------------+------------------------------------------+\n| Variable | What this Expands to | Example |\n+==================+================================+==========================================+\n| {OS} | Name of the OS used | Linux, Windows, Darwin, FreeBSD, OpenBSD |\n+------------------+--------------------------------+------------------------------------------+\n| {Version} | Version of Nuitka | e.g. (1, 6, 0) |\n+------------------+--------------------------------+------------------------------------------+\n| {Commercial} | Version of Nuitka Commercial | e.g. (2, 1, 0) |\n+------------------+--------------------------------+------------------------------------------+\n| {Arch} | Architecture used | x86_64, arm64, etc. |\n+------------------+--------------------------------+------------------------------------------+\n| {MAIN_DIRECTORY} | Directory of the compiled file | some_dir/maybe_relative |\n+------------------+--------------------------------+------------------------------------------+\n| {Flavor} | Variant of Python | e.g. Debian Python, Anaconda Python |\n+------------------+--------------------------------+------------------------------------------+\n\nThe use of ``{MAIN_DIRECTORY}`` is recommended when you want to specify\na filename relative to the main script, e.g. for use in data file\noptions or user package configuration yaml files,\n\n.. code:: python\n\n # nuitka-project: --include-data-files={MAIN_DIRECTORY}/my_icon.png=my_icon.png\n # nuitka-project: --user-package-configuration-file={MAIN_DIRECTORY}/user.nuitka-package.config.yml\n\nPython command line flags\n=========================\n\nFor passing things like ``-O`` or ``-S`` to Python, to your compiled\nprogram, there is a command line option name ``--python-flag=`` which\nmakes Nuitka emulate these options.\n\nThe most important ones are supported, more can certainly be added.\n\nCaching compilation results\n===========================\n\nThe C compiler, when invoked with the same input files, will take a long\ntime and much CPU to compile over and over. Make sure you are having\n``ccache`` installed and configured when using gcc (even on Windows). It\nwill make repeated compilations much faster, even if things are not yet\nnot perfect, i.e. changes to the program can cause many C files to\nchange, requiring a new compilation instead of using the cached result.\n\nOn Windows, with gcc Nuitka supports using ``ccache.exe`` which it will\noffer to download from an official source and it automatically. This is\nthe recommended way of using it on Windows, as other versions can e.g.\nhang.\n\nNuitka will pick up ``ccache`` if it's found in system ``PATH``, and it\nwill also be possible to provide if by setting ``NUITKA_CCACHE_BINARY``\nto the full path of the binary, this is for use in CI systems where\nthings might be non-standard.\n\nFor the MSVC compilers and ClangCL setups, using the ``clcache`` is\nautomatic and included in Nuitka.\n\nOn macOS and Intel, there is an automatic download of a ``ccache``\nbinary from our site, for arm64 arches, it's recommended to use this\nsetup, which installs Homebrew and ccache in there. Nuitka picks that\none up automatically if it on that kind of machine. You need and should\nnot use Homebrew with Nuitka otherwise, it's not the best for standalone\ndeployments, but we can take ``ccache`` from there.\n\n.. code:: bash\n\n export HOMEBREW_INSTALL_FROM_API=1\n /bin/bash -c \"$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install.sh)\"\n eval $(/opt/homebrew/bin/brew shellenv)\n brew install ccache\n\nControl where Caches live\n=========================\n\nThe storage for cache results of all kinds, downloads, cached\ncompilation results from C and Nuitka, is done in a platform dependent\ndirectory as determined by the ``appdirs`` package. However, you can\noverride it with setting the environment variable ``NUITKA_CACHE_DIR``\nto a base directory. This is for use in environments where the home\ndirectory is not persisted, but other paths are.\n\nThere is also per cache control of these caches, here is a table of\nenvironment variables that you can set before starting the compilation,\nto make Nuitka store some of these caches in an entirely separate space.\n\n+------------------+-----------------------------------+----------------------------------------+\n| Cache name | Environment Variable | Data Put there |\n+==================+===================================+========================================+\n| downloads | NUITKA_CACHE_DIR_DOWNLOADS | Downloads made, e.g. dependency walker |\n+------------------+-----------------------------------+----------------------------------------+\n| ccache | NUITKA_CACHE_DIR_CCACHE | Object files created by gcc |\n+------------------+-----------------------------------+----------------------------------------+\n| clcache | NUITKA_CACHE_DIR_CLCACHE | Object files created by MSVC |\n+------------------+-----------------------------------+----------------------------------------+\n| bytecode | NUITKA_CACHE_DIR_BYTECODE | Bytecode of demoted modules |\n+------------------+-----------------------------------+----------------------------------------+\n| dll-dependencies | NUITKA_CACHE_DIR_DLL_DEPENDENCIES | DLL dependencies |\n+------------------+-----------------------------------+----------------------------------------+\n\nRunners\n=======\n\nAvoid running the ``nuitka`` binary, doing ``python -m nuitka`` will\nmake a 100% sure you are using what you think you are. Using the wrong\nPython will make it give you ``SyntaxError`` for good code or\n``ImportError`` for installed modules. That is happening, when you run\nNuitka with Python2 on Python3 code and vice versa. By explicitly\ncalling the same Python interpreter binary, you avoid that issue\nentirely.\n\nFastest C Compilers\n===================\n\nThe fastest binaries of ``pystone.exe`` on Windows with 64 bits Python\nproved to be significantly faster with MinGW64, roughly 20% better\nscore. So it is recommended for use over MSVC. Using ``clang-cl.exe`` of\nClang7 was faster than MSVC, but still significantly slower than\nMinGW64, and it will be harder to use, so it is not recommended.\n\nOn Linux, for ``pystone.bin``, the binary produced by ``clang6`` was\nfaster than ``gcc-6.3``, but not by a significant margin. Since gcc is\nmore often already installed, that is recommended to use for now.\n\nDifferences in C compilation times have not yet been examined.\n\nUnexpected Slowdowns\n====================\n\nUsing the Python DLL, like standard CPython does, can lead to unexpected\nslowdowns, e.g. in uncompiled code that works with Unicode strings. This\nis because calling to the DLL rather than residing in the DLL causes\noverhead, and this even happens to the DLL with itself, being slower,\nthan a Python all contained in one binary.\n\nSo if feasible, aim at static linking, which is currently only possible\nwith Anaconda Python on non-Windows, Debian Python2, self compiled\nPythons (do not activate ``--enable-shared``, not needed), and installs\ncreated with ``pyenv``.\n\n.. note::\n\n On Anaconda, you may need to execute ``conda install\n libpython-static``\n\nStandalone executables and dependencies\n=======================================\n\nThe process of making standalone executables for Windows traditionally\ninvolves using an external dependency walker to copy necessary libraries\nalong with the compiled executables to the distribution folder.\n\nThere are plenty of ways to find that something is missing. Do not\nmanually copy things into the folder, esp. not DLLs, as that's not going\nto work. Instead, make bug reports to get these handled by Nuitka\nproperly.\n\nWindows errors with resources\n=============================\n\nOn Windows, the Windows Defender tool and the Windows Indexing Service\nboth scan the freshly created binaries, while Nuitka wants to work with\nit, e.g. adding more resources, and then preventing operations randomly\ndue to holding locks. Make sure to exclude your compilation stage from\nthese services.\n\nWindows standalone program redistribution\n=========================================\n\nWhether compiling with MingW or MSVC, the standalone programs have\nexternal dependencies to Visual C Runtime libraries. Nuitka tries to\nship those dependent DLLs by copying them from your system.\n\nBeginning with Microsoft Windows 10, Microsoft ships ``ucrt.dll``\n(Universal C Runtime libraries) which handles calls to\n``api-ms-crt-*.dll``.\n\nWith earlier Windows platforms (and wine/ReactOS), you should consider\ninstalling Visual C runtime libraries before executing a Nuitka\nstandalone compiled program.\n\nDepending on the used C compiler, you'll need the following redist\nversions on the target machines. However, notice that compilation using\nthe 14.3 based version is always recommended, working and best\nsupported, unless you want to target Windows 7.\n\n+------------------+-------------+----------+\n| Visual C version | Redist Year | CPython |\n+==================+=============+==========+\n| 14.3 | 2022 | 3.11 |\n+------------------+-------------+----------+\n| 14.2 | 2019 | 3.5-3.10 |\n+------------------+-------------+----------+\n| 14.1 | 2017 | 3.5-3.8 |\n+------------------+-------------+----------+\n| 14.0 | 2015 | 3.5-3.8 |\n+------------------+-------------+----------+\n| 10.0 | 2010 | 3.4 |\n+------------------+-------------+----------+\n| 9.0 | 2008 | 2.6, 2.7 |\n+------------------+-------------+----------+\n\nWhen using MingGW64 as downloaded by Nuitka, you'll need the following\nredist versions:\n\n+----------------------------+-------------+---------------------+\n| MingGW64 version | Redist Year | CPython |\n+============================+=============+=====================+\n| WinLibs automatic download | 2015 | 2.6, 2.7, 3.4- 3.11 |\n+----------------------------+-------------+---------------------+\n\nOnce the corresponding runtime libraries are installed on the target\nsystem, you may remove all ``api-ms-crt-*.dll`` files from your Nuitka\ncompiled dist folder.\n\nDetecting Nuitka at run time\n============================\n\nNuitka does *not* ``sys.frozen`` unlike other tools because it usually\ntriggers inferior code for no reason. For Nuitka, we have the module\nattribute ``__compiled__`` to test if a specific module was compiled,\nand the function attribute ``__compiled__`` to test if a specific\nfunction was compiled.\n\nProviding extra Options to Nuitka C compilation\n===============================================\n\nNuitka will apply values from the environment variables ``CCFLAGS``,\n``LDFLAGS`` during the compilation on top of what it determines to be\nnecessary. Beware, of course, that is this is only useful if you know\nwhat you are doing, so should this pose issues, raise them only with\nperfect information.\n\nProducing a 32 bit binary on a 64 bit Windows system\n====================================================\n\nNuitka will automatically target the architecture of the Python you are\nusing. If this is 64 bit, it will create a 64 bit binary, if it is 32\nbit, it will create a 32 bit binary. You have the option to select the\nbits when you download the Python. In the output of ``python -m nuitka\n--version`` there is a line for the architecture. It's ``Arch: x86_64``\nfor 64 bits, and just ``Arch: x86`` for 32 bits.\n\nThe C compiler will be picked to match that more or less automatically.\nIf you specify it explicitly, and it mismatches, you will get a warning\nabout the mismatch and informed that your compiler choice was rejected.\n\n********************\n Compilation Report\n********************\n\nWhen you use ``--report=compilation-report.xml`` Nuitka will create an\nXML file with detailed information about the compilation and packaging\nprocess. This is growing in completeness with every release and exposes\nmodule usage attempts, timings of the compilation, plugin influences,\ndata file paths, DLLs, and reasons why things are included or not.\n\nAt this time, the report contains absolute paths in some places, with\nyour private information. The goal is to make this blended out by\ndefault because we also want to become able to compare compilation\nreports from different setups, e.g. with updated packages, and see the\nchanges to Nuitka. The report is, however, recommended for your bug\nreporting.\n\nAlso, another form is available, where the report is free form and\naccording to a Jinja2 template of yours, and one that is included in\nNuitka. The same information as used to produce the XML file is\naccessible. However, right now, this is not yet documented, but we plan\nto add a table with the data. For a reader of the source code that is\nfamiliar with Jinja2, however, it will be easy to do it now already.\n\nIf you have a template, you can use it like this\n``--report-template=your_template.rst.j2:your_report.rst`` and of\ncourse, the usage of restructured text, is only an example. You can use\nMarkdown, your own XML, or whatever you see fit. Nuitka will just expand\nthe template with the compilation report data.\n\nCurrently, the following reports are included in Nuitka. You just use\nthe name as a filename, and Nuitka will pick that one instead.\n\n+---------------+--------------+--------------------------------------------------------+\n| Report Name | Status | Purpose |\n+===============+==============+========================================================+\n| LicenseReport | experimental | Distributions used in a compilation with license texts |\n+---------------+--------------+--------------------------------------------------------+\n\n.. note::\n\n The community can and should contribute more report types and help\n enhancing the existing ones for good looks.\n\n*************\n Performance\n*************\n\nThis chapter gives an overview, of what to currently expect in terms of\nperformance from Nuitka. It's a work in progress and is updated as we\ngo. The current focus for performance measurements is Python 2.7, but\n3.x is going to follow later.\n\npystone results\n===============\n\nThe results are the top value from this kind of output, running pystone\n1000 times and taking the minimal value. The idea is that the fastest\nrun is most meaningful, and eliminates usage spikes.\n\n.. code:: bash\n\n echo \"Uncompiled Python2\"\n for i in {1..100}; do BENCH=1 python2 tests/benchmarks/pystone.py ; done | sort -rn | head -n 1\n python2 -m nuitka --lto=yes --pgo tests/benchmarks/pystone.py\n echo \"Compiled Python2\"\n for i in {1..100}; do BENCH=1 ./pystone.bin ; done | sort -n | head -rn 1\n\n echo \"Uncompiled Python3\"\n for i in {1..100}; do BENCH=1 python3 tests/benchmarks/pystone3.py ; done | sort -rn | head -n 1\n python3 -m nuitka --lto=yes --pgo tests/benchmarks/pystone3.py\n echo \"Compiled Python3\"\n for i in {1..100}; do BENCH=1 ./pystone3.bin ; done | sort -rn | head -n 1\n\n+-------------------+-------------------+----------------------+---------------------+\n| Python | Uncompiled | Compiled LTO | Compiled PGO |\n+===================+===================+======================+=====================+\n| Debian Python 2.7 | 137497.87 (1.000) | 460995.20 (3.353) | 503681.91 (3.663) |\n+-------------------+-------------------+----------------------+---------------------+\n| Nuitka Python 2.7 | 144074.78 (1.048) | 479271.51 (3.486) | 511247.44 (3.718) |\n+-------------------+-------------------+----------------------+---------------------+\n\nReport issues or bugs\n=====================\n\nShould you encounter any issues, bugs, or ideas, please visit the\n`Nuitka bug tracker <https://github.com/Nuitka/Nuitka/issues>`__ and\nreport them.\n\nBest practices for reporting bugs:\n\n- Please always include the following information in your report, for\n the underlying Python version. You can easily copy&paste this into\n your report. It does contain more information than you think. Do not\n write something manually. You may always add, of course,\n\n .. code:: bash\n\n python -m nuitka --version\n\n- Try to make your example minimal. That is, try to remove code that\n does not contribute to the issue as much as possible. Ideally, come\n up with a small reproducing program that illustrates the issue, using\n ``print`` with different results when the program runs compiled or\n native.\n\n- If the problem occurs spuriously (i.e. not each time), try to set the\n environment variable ``PYTHONHASHSEED`` to ``0``, disabling hash\n randomization. If that makes the problem go away, try increasing in\n steps of 1 to a hash seed value that makes it happen every time,\n include it in your report.\n\n- Do not include the created code in your report. Given proper input,\n it's redundant, and it's not likely that I will look at it without\n the ability to change the Python or Nuitka source and re-run it.\n\n- Do not send screenshots of text, that is bad and lazy. Instead,\n capture text outputs from the console.\n\n***************************\n Unsupported functionality\n***************************\n\nThe ``co_code`` attribute of code objects\n=========================================\n\nThe code objects are empty for native compiled functions. There is no\nbytecode with Nuitka's compiled function objects, so there is no way to\nprovide it.\n\nPDB\n===\n\nThere is no tracing of compiled functions to attach a debugger to.\n",
"bugtrack_url": null,
"license": "Apache License, Version 2.0",
"summary": "Python compiler with full language support and CPython compatibility",
"version": "2.1.6",
"project_urls": {
"Commercial": "https://nuitka.net/doc/commercial.html",
"Documentation": "https://nuitka.net/doc/user-manual.html",
"Donations": "https://nuitka.net/pages/donations.html",
"Homepage": "https://nuitka.net",
"Mastodon": "https://fosstodon.org/@kayhayen",
"Source": "https://github.com/Nuitka/Nuitka",
"Support": "https://nuitka.net/pages/support.html",
"Twitter": "https://twitter.com/KayHayen"
},
"split_keywords": [
"compiler",
" python",
" nuitka"
],
"urls": [
{
"comment_text": "",
"digests": {
"blake2b_256": "85d0715db68f43d29e8c54033523093f152776f3c9474334c5a0b769a3e748d2",
"md5": "2afb4236a9d8c31e68b39e12fbf7c9f1",
"sha256": "ee961a34f2fc54c28607e84e65e5b33b47b1b4352eb97fa4d158e2f204a2a183"
},
"downloads": -1,
"filename": "Nuitka-2.1.6.tar.gz",
"has_sig": false,
"md5_digest": "2afb4236a9d8c31e68b39e12fbf7c9f1",
"packagetype": "sdist",
"python_version": "source",
"requires_python": null,
"size": 3637189,
"upload_time": "2024-04-19T13:35:12",
"upload_time_iso_8601": "2024-04-19T13:35:12.718639Z",
"url": "https://files.pythonhosted.org/packages/85/d0/715db68f43d29e8c54033523093f152776f3c9474334c5a0b769a3e748d2/Nuitka-2.1.6.tar.gz",
"yanked": false,
"yanked_reason": null
}
],
"upload_time": "2024-04-19 13:35:12",
"github": true,
"gitlab": false,
"bitbucket": false,
"codeberg": false,
"github_user": "Nuitka",
"github_project": "Nuitka",
"travis_ci": false,
"coveralls": false,
"github_actions": true,
"requirements": [
{
"name": "appdirs",
"specs": []
},
{
"name": "tqdm",
"specs": []
},
{
"name": "ordered-set",
"specs": [
[
"==",
"4.1.0"
]
]
},
{
"name": "orderedset",
"specs": [
[
"==",
"2.0.3"
]
]
},
{
"name": "orderedset",
"specs": [
[
"==",
"2.0.3"
]
]
},
{
"name": "orderedset",
"specs": [
[
"==",
"2.0.3"
]
]
},
{
"name": "subprocess32",
"specs": []
},
{
"name": "zstandard",
"specs": [
[
">=",
"0.15"
]
]
},
{
"name": "pyyaml",
"specs": []
},
{
"name": "Jinja2",
"specs": [
[
">=",
"2.10.2"
]
]
}
],
"lcname": "nuitka"
}
JSON
