Introduction
============
.. image:: https://readthedocs.org/projects/adafruit-circuitpython-dsp310/badge/?version=latest
:target: https://docs.circuitpython.org/projects/dps310/en/latest/
:alt: Documentation Status
.. image:: https://raw.githubusercontent.com/adafruit/Adafruit_CircuitPython_Bundle/main/badges/adafruit_discord.svg
:target: https://adafru.it/discord
:alt: Discord
.. image:: https://github.com/adafruit/Adafruit_CircuitPython_DPS310/workflows/Build%20CI/badge.svg
:target: https://github.com/adafruit/Adafruit_CircuitPython_DPS310/actions
:alt: Build Status
.. image:: https://img.shields.io/badge/code%20style-black-000000.svg
:target: https://github.com/psf/black
:alt: Code Style: Black
Library for the DPS310 Precision Barometric Pressure Sensor
Dependencies
=============
This driver depends on:
* `Adafruit CircuitPython <https://github.com/adafruit/circuitpython>`_
* `Bus Device <https://github.com/adafruit/Adafruit_CircuitPython_BusDevice>`_
* `Register <https://github.com/adafruit/Adafruit_CircuitPython_Register>`_
Please ensure all dependencies are available on the CircuitPython filesystem.
This is easily achieved by downloading
`the Adafruit library and driver bundle <https://circuitpython.org/libraries>`_.
Installing from PyPI
=====================
On supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally `from
PyPI <https://pypi.org/project/adafruit-circuitpython-dps310/>`_. To install for current user:
.. code-block:: shell
pip3 install adafruit-circuitpython-dps310
To install system-wide (this may be required in some cases):
.. code-block:: shell
sudo pip3 install adafruit-circuitpython-dps310
To install in a virtual environment in your current project:
.. code-block:: shell
mkdir project-name && cd project-name
python3 -m venv .venv
source .venv/bin/activate
pip3 install adafruit-circuitpython-dps310
Installing to a connected CircuitPython Device
==============================================
Some devices, eg. the QT-PY, are very limited in memory. The DPS310 library contains
two variants - basic and advanced - which give different levels of functionality.
Installing the DPS310 library could have the following outcomes:
* It installs successfully and your code runs successfully. Woo-hoo! Continue with
your amazing project.
* It installs successfully and your code fails to run with a memory allocation
error. Try one of the following:
* If your ``code.py`` is large, especially if it has lots of comments, you
can shrink it into a ``.mpy`` file instead. See the Adafruit
`Learn Guide <https://learn.adafruit.com/Memory-saving-tips-for-CircuitPython/non-volatile-not-enough-disk-space>`_
on shrinking your code.
* Only use the basic DPS310 implementation, and remove the following file:
``<CIRCUITPY>/lib/adafruit_dps310/advanced.mpy`` where <CIRCUITPY> is the
mounted location of your device. Make sure that your code only uses the basic
implementation.
Usage Example
=============
.. code-block:: python3
import time
import board
from adafruit_dps310.basic import DPS310
i2c = board.I2C() # uses board.SCL and board.SDA
dps310 = DPS310(i2c)
while True:
print("Temperature = %.2f *C"%dps310.temperature)
print("Pressure = %.2f hPa"%dps310.pressure)
print("")
time.sleep(1.0)
Known Issues
============
Library extensive features might not be compatible with memory limited boards. For these kind of
boards you need to use the ``adafruit_dps310/basic.mpy``, the file needs to be in the ``mpy``
format in order to fit in memory.
For boards with more memory available you could use the code present
in ``adafruit_dps310/advanced.py``. For usage refer to ``dps310_simpletest_advanced.py``
Documentation
=============
API documentation for this library can be found on `Read the Docs <https://docs.circuitpython.org/projects/dps310/en/latest/>`_.
For information on building library documentation, please check out `this guide <https://learn.adafruit.com/creating-and-sharing-a-circuitpython-library/sharing-our-docs-on-readthedocs#sphinx-5-1>`_.
Contributing
============
Contributions are welcome! Please read our `Code of Conduct
<https://github.com/adafruit/Adafruit_CircuitPython_DPS310/blob/main/CODE_OF_CONDUCT.md>`_
before contributing to help this project stay welcoming.
Raw data
{
"_id": null,
"home_page": "",
"name": "adafruit-circuitpython-dps310",
"maintainer": "",
"docs_url": null,
"requires_python": "",
"maintainer_email": "",
"keywords": "adafruit,blinka,circuitpython,micropython,dps310,pressure,sensor,barometric,altimeter,altitude",
"author": "",
"author_email": "Adafruit Industries <circuitpython@adafruit.com>",
"download_url": "https://files.pythonhosted.org/packages/77/57/81e3a5d59a058232c7a361f75c937568ea15b8fb136e3c383fe55e6eacd2/adafruit-circuitpython-dps310-2.1.13.tar.gz",
"platform": null,
"description": "Introduction\n============\n\n.. image:: https://readthedocs.org/projects/adafruit-circuitpython-dsp310/badge/?version=latest\n :target: https://docs.circuitpython.org/projects/dps310/en/latest/\n :alt: Documentation Status\n\n.. image:: https://raw.githubusercontent.com/adafruit/Adafruit_CircuitPython_Bundle/main/badges/adafruit_discord.svg\n :target: https://adafru.it/discord\n :alt: Discord\n\n.. image:: https://github.com/adafruit/Adafruit_CircuitPython_DPS310/workflows/Build%20CI/badge.svg\n :target: https://github.com/adafruit/Adafruit_CircuitPython_DPS310/actions\n :alt: Build Status\n\n.. image:: https://img.shields.io/badge/code%20style-black-000000.svg\n :target: https://github.com/psf/black\n :alt: Code Style: Black\n\nLibrary for the DPS310 Precision Barometric Pressure Sensor\n\n\nDependencies\n=============\nThis driver depends on:\n\n* `Adafruit CircuitPython <https://github.com/adafruit/circuitpython>`_\n* `Bus Device <https://github.com/adafruit/Adafruit_CircuitPython_BusDevice>`_\n* `Register <https://github.com/adafruit/Adafruit_CircuitPython_Register>`_\n\nPlease ensure all dependencies are available on the CircuitPython filesystem.\nThis is easily achieved by downloading\n`the Adafruit library and driver bundle <https://circuitpython.org/libraries>`_.\n\nInstalling from PyPI\n=====================\n\nOn supported GNU/Linux systems like the Raspberry Pi, you can install the driver locally `from\nPyPI <https://pypi.org/project/adafruit-circuitpython-dps310/>`_. To install for current user:\n\n.. code-block:: shell\n\n pip3 install adafruit-circuitpython-dps310\n\nTo install system-wide (this may be required in some cases):\n\n.. code-block:: shell\n\n sudo pip3 install adafruit-circuitpython-dps310\n\nTo install in a virtual environment in your current project:\n\n.. code-block:: shell\n\n mkdir project-name && cd project-name\n python3 -m venv .venv\n source .venv/bin/activate\n pip3 install adafruit-circuitpython-dps310\n\n\nInstalling to a connected CircuitPython Device\n==============================================\nSome devices, eg. the QT-PY, are very limited in memory. The DPS310 library contains\ntwo variants - basic and advanced - which give different levels of functionality.\n\nInstalling the DPS310 library could have the following outcomes:\n\n * It installs successfully and your code runs successfully. Woo-hoo! Continue with\n your amazing project.\n * It installs successfully and your code fails to run with a memory allocation\n error. Try one of the following:\n\n * If your ``code.py`` is large, especially if it has lots of comments, you\n can shrink it into a ``.mpy`` file instead. See the Adafruit\n `Learn Guide <https://learn.adafruit.com/Memory-saving-tips-for-CircuitPython/non-volatile-not-enough-disk-space>`_\n on shrinking your code.\n * Only use the basic DPS310 implementation, and remove the following file:\n ``<CIRCUITPY>/lib/adafruit_dps310/advanced.mpy`` where <CIRCUITPY> is the\n mounted location of your device. Make sure that your code only uses the basic\n implementation.\n\n\nUsage Example\n=============\n\n.. code-block:: python3\n\n import time\n import board\n from adafruit_dps310.basic import DPS310\n\n i2c = board.I2C() # uses board.SCL and board.SDA\n\n dps310 = DPS310(i2c)\n\n while True:\n print(\"Temperature = %.2f *C\"%dps310.temperature)\n print(\"Pressure = %.2f hPa\"%dps310.pressure)\n print(\"\")\n time.sleep(1.0)\n\n\nKnown Issues\n============\nLibrary extensive features might not be compatible with memory limited boards. For these kind of\nboards you need to use the ``adafruit_dps310/basic.mpy``, the file needs to be in the ``mpy``\nformat in order to fit in memory.\nFor boards with more memory available you could use the code present\nin ``adafruit_dps310/advanced.py``. For usage refer to ``dps310_simpletest_advanced.py``\n\n\nDocumentation\n=============\n\nAPI documentation for this library can be found on `Read the Docs <https://docs.circuitpython.org/projects/dps310/en/latest/>`_.\n\nFor information on building library documentation, please check out `this guide <https://learn.adafruit.com/creating-and-sharing-a-circuitpython-library/sharing-our-docs-on-readthedocs#sphinx-5-1>`_.\n\nContributing\n============\n\nContributions are welcome! Please read our `Code of Conduct\n<https://github.com/adafruit/Adafruit_CircuitPython_DPS310/blob/main/CODE_OF_CONDUCT.md>`_\nbefore contributing to help this project stay welcoming.\n",
"bugtrack_url": null,
"license": "MIT",
"summary": "Library for the DPS310 Precision Barometric Pressure Sensor",
"version": "2.1.13",
"project_urls": {
"Homepage": "https://github.com/adafruit/Adafruit_CircuitPython_DPS310"
},
"split_keywords": [
"adafruit",
"blinka",
"circuitpython",
"micropython",
"dps310",
"pressure",
"sensor",
"barometric",
"altimeter",
"altitude"
],
"urls": [
{
"comment_text": "",
"digests": {
"blake2b_256": "6545b032e12ebab31018c6416df7e2a6f969f42b851bd029f8527de0704ceaf2",
"md5": "562cab0a0e323741806fc7d8f9798ddc",
"sha256": "6873549c8ba3f641af0b03f4d4ade4c60c6fb7609ef9e43c39327d5ad93b2eec"
},
"downloads": -1,
"filename": "adafruit_circuitpython_dps310-2.1.13-py3-none-any.whl",
"has_sig": false,
"md5_digest": "562cab0a0e323741806fc7d8f9798ddc",
"packagetype": "bdist_wheel",
"python_version": "py3",
"requires_python": null,
"size": 10949,
"upload_time": "2023-09-25T15:39:00",
"upload_time_iso_8601": "2023-09-25T15:39:00.732446Z",
"url": "https://files.pythonhosted.org/packages/65/45/b032e12ebab31018c6416df7e2a6f969f42b851bd029f8527de0704ceaf2/adafruit_circuitpython_dps310-2.1.13-py3-none-any.whl",
"yanked": false,
"yanked_reason": null
},
{
"comment_text": "",
"digests": {
"blake2b_256": "775781e3a5d59a058232c7a361f75c937568ea15b8fb136e3c383fe55e6eacd2",
"md5": "435ddddb306b54edeae9f0eb8a0eae53",
"sha256": "4ea95a1793dfd5895c8a301445195bfee76c322c2c1625642294acd24f0ba794"
},
"downloads": -1,
"filename": "adafruit-circuitpython-dps310-2.1.13.tar.gz",
"has_sig": false,
"md5_digest": "435ddddb306b54edeae9f0eb8a0eae53",
"packagetype": "sdist",
"python_version": "source",
"requires_python": null,
"size": 30809,
"upload_time": "2023-09-25T15:39:02",
"upload_time_iso_8601": "2023-09-25T15:39:02.072986Z",
"url": "https://files.pythonhosted.org/packages/77/57/81e3a5d59a058232c7a361f75c937568ea15b8fb136e3c383fe55e6eacd2/adafruit-circuitpython-dps310-2.1.13.tar.gz",
"yanked": false,
"yanked_reason": null
}
],
"upload_time": "2023-09-25 15:39:02",
"github": true,
"gitlab": false,
"bitbucket": false,
"codeberg": false,
"github_user": "adafruit",
"github_project": "Adafruit_CircuitPython_DPS310",
"travis_ci": false,
"coveralls": false,
"github_actions": true,
"requirements": [],
"lcname": "adafruit-circuitpython-dps310"
}
JSON
