python-onvif-zeep
============
ONVIF Client Implementation in Python
Dependencies
------------
`zeep <http://docs.python-zeep.org>`_ >= 3.0.0
Install python-onvif-zeep
-------------------------
**From Source**
You should clone this repository and run setup.py::
cd python-onvif-zeep && python setup.py install
Alternatively, you can run::
pip install --upgrade onvif_zeep
Getting Started
---------------
Initialize an ONVIFCamera instance
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
::
from onvif import ONVIFCamera
mycam = ONVIFCamera('192.168.0.2', 80, 'user', 'passwd', '/etc/onvif/wsdl/')
Now, an ONVIFCamera instance is available. By default, a devicemgmt service is also available if everything is OK.
So, all operations defined in the WSDL document::
/etc/onvif/wsdl/devicemgmt.wsdl
are available.
Get information from your camera
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
::
# Get Hostname
resp = mycam.devicemgmt.GetHostname()
print 'My camera`s hostname: ' + str(resp.Name)
# Get system date and time
dt = mycam.devicemgmt.GetSystemDateAndTime()
tz = dt.TimeZone
year = dt.UTCDateTime.Date.Year
hour = dt.UTCDateTime.Time.Hour
Configure (Control) your camera
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
To configure your camera, there are two ways to pass parameters to service methods.
**Dict**
This is the simpler way::
params = {'Name': 'NewHostName'}
device_service.SetHostname(params)
**Type Instance**
This is the recommended way. Type instance will raise an
exception if you set an invalid (or non-existent) parameter.
::
params = mycam.devicemgmt.create_type('SetHostname')
params.Hostname = 'NewHostName'
mycam.devicemgmt.SetHostname(params)
time_params = mycam.devicemgmt.create_type('SetSystemDateAndTime')
time_params.DateTimeType = 'Manual'
time_params.DaylightSavings = True
time_params.TimeZone.TZ = 'CST-8:00:00'
time_params.UTCDateTime.Date.Year = 2014
time_params.UTCDateTime.Date.Month = 12
time_params.UTCDateTime.Date.Day = 3
time_params.UTCDateTime.Time.Hour = 9
time_params.UTCDateTime.Time.Minute = 36
time_params.UTCDateTime.Time.Second = 11
mycam.devicemgmt.SetSystemDateAndTime(time_params)
Use other services
~~~~~~~~~~~~~~~~~~
ONVIF protocol has defined many services.
You can find all the services and operations `here <http://www.onvif.org/onvif/ver20/util/operationIndex.html>`_.
ONVIFCamera has support methods to create new services::
# Create ptz service
ptz_service = mycam.create_ptz_service()
# Get ptz configuration
mycam.ptz.GetConfiguration()
# Another way
# ptz_service.GetConfiguration()
Or create an unofficial service::
xaddr = 'http://192.168.0.3:8888/onvif/yourservice'
yourservice = mycam.create_onvif_service('service.wsdl', xaddr, 'yourservice')
yourservice.SomeOperation()
# Another way
# mycam.yourservice.SomeOperation()
ONVIF CLI
---------
python-onvif also provides a command line interactive interface: onvif-cli.
onvif-cli is installed automatically.
Single command example
~~~~~~~~~~~~~~~~~~~~~~
::
$ onvif-cli devicemgmt GetHostname --user 'admin' --password '12345' --host '192.168.0.112' --port 80
True: {'FromDHCP': True, 'Name': hision}
$ onvif-cli devicemgmt SetHostname "{'Name': 'NewerHostname'}" --user 'admin' --password '12345' --host '192.168.0.112' --port 80
True: {}
Interactive mode
~~~~~~~~~~~~~~~~
::
$ onvif-cli -u 'admin' -a '12345' --host '192.168.0.112' --port 80 --wsdl /etc/onvif/wsdl/
ONVIF >>> cmd
analytics devicemgmt events imaging media ptz
ONVIF >>> cmd devicemgmt GetWsdlUrl
True: http://www.onvif.org/
ONVIF >>> cmd devicemgmt SetHostname {'Name': 'NewHostname'}
ONVIF >>> cmd devicemgmt GetHostname
True: {'Name': 'NewHostName'}
ONVIF >>> cmd devicemgmt SomeOperation
False: No Operation: SomeOperation
NOTE: Tab completion is supported for interactive mode.
Batch mode
~~~~~~~~~~
::
$ vim batchcmds
$ cat batchcmds
cmd devicemgmt GetWsdlUrl
cmd devicemgmt SetHostname {'Name': 'NewHostname', 'FromDHCP': True}
cmd devicemgmt GetHostname
$ onvif-cli --host 192.168.0.112 -u admin -a 12345 -w /etc/onvif/wsdl/ < batchcmds
ONVIF >>> True: http://www.onvif.org/
ONVIF >>> True: {}
ONVIF >>> True: {'FromDHCP': False, 'Name': NewHostname}
References
----------
* `ONVIF Offical Website <http://www.onvif.com>`_
* `Operations Index <http://www.onvif.org/onvif/ver20/util/operationIndex.html>`_
* `ONVIF Develop Documents <http://www.onvif.org/specs/DocMap-2.4.2.html>`_
* `Foscam Python Lib <http://github.com/quatanium/foscam-python-lib>`_
Raw data
{
"_id": null,
"home_page": "http://github.com/quatanium/python-onvif",
"name": "onvif-zeep",
"maintainer": "sinchb",
"docs_url": null,
"requires_python": "",
"maintainer_email": "sinchb128@gmail.com",
"keywords": "ONVIF,Camera,IPC",
"author": "Cherish Chen",
"author_email": "sinchb128@gmail.com",
"download_url": "https://files.pythonhosted.org/packages/d7/3c/fe79b4f59337b5cf5d40ea747764b4ff38bab322b2de66706a4d8d7b01e8/onvif_zeep-0.2.12.tar.gz",
"platform": "",
"description": "python-onvif-zeep\n============\n\nONVIF Client Implementation in Python\n\nDependencies\n------------\n`zeep <http://docs.python-zeep.org>`_ >= 3.0.0\n\nInstall python-onvif-zeep\n-------------------------\n**From Source**\n\nYou should clone this repository and run setup.py::\n\n cd python-onvif-zeep && python setup.py install\n\nAlternatively, you can run::\n\n pip install --upgrade onvif_zeep\n\n\nGetting Started\n---------------\n\nInitialize an ONVIFCamera instance\n~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\n\n::\n\n from onvif import ONVIFCamera\n mycam = ONVIFCamera('192.168.0.2', 80, 'user', 'passwd', '/etc/onvif/wsdl/')\n\nNow, an ONVIFCamera instance is available. By default, a devicemgmt service is also available if everything is OK.\n\nSo, all operations defined in the WSDL document::\n\n/etc/onvif/wsdl/devicemgmt.wsdl\n\nare available.\n\nGet information from your camera\n~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\n::\n\n # Get Hostname\n resp = mycam.devicemgmt.GetHostname()\n print 'My camera`s hostname: ' + str(resp.Name)\n\n # Get system date and time\n dt = mycam.devicemgmt.GetSystemDateAndTime()\n tz = dt.TimeZone\n year = dt.UTCDateTime.Date.Year\n hour = dt.UTCDateTime.Time.Hour\n\nConfigure (Control) your camera\n~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~\n\nTo configure your camera, there are two ways to pass parameters to service methods.\n\n**Dict**\n\nThis is the simpler way::\n\n params = {'Name': 'NewHostName'}\n device_service.SetHostname(params)\n\n**Type Instance**\n\nThis is the recommended way. Type instance will raise an\nexception if you set an invalid (or non-existent) parameter.\n\n::\n\n params = mycam.devicemgmt.create_type('SetHostname')\n params.Hostname = 'NewHostName'\n mycam.devicemgmt.SetHostname(params)\n\n time_params = mycam.devicemgmt.create_type('SetSystemDateAndTime')\n time_params.DateTimeType = 'Manual'\n time_params.DaylightSavings = True\n time_params.TimeZone.TZ = 'CST-8:00:00'\n time_params.UTCDateTime.Date.Year = 2014\n time_params.UTCDateTime.Date.Month = 12\n time_params.UTCDateTime.Date.Day = 3\n time_params.UTCDateTime.Time.Hour = 9\n time_params.UTCDateTime.Time.Minute = 36\n time_params.UTCDateTime.Time.Second = 11\n mycam.devicemgmt.SetSystemDateAndTime(time_params)\n\nUse other services\n~~~~~~~~~~~~~~~~~~\nONVIF protocol has defined many services.\nYou can find all the services and operations `here <http://www.onvif.org/onvif/ver20/util/operationIndex.html>`_.\nONVIFCamera has support methods to create new services::\n\n # Create ptz service\n ptz_service = mycam.create_ptz_service()\n # Get ptz configuration\n mycam.ptz.GetConfiguration()\n # Another way\n # ptz_service.GetConfiguration()\n\nOr create an unofficial service::\n\n xaddr = 'http://192.168.0.3:8888/onvif/yourservice'\n yourservice = mycam.create_onvif_service('service.wsdl', xaddr, 'yourservice')\n yourservice.SomeOperation()\n # Another way\n # mycam.yourservice.SomeOperation()\n\nONVIF CLI\n---------\npython-onvif also provides a command line interactive interface: onvif-cli.\nonvif-cli is installed automatically.\n\nSingle command example\n~~~~~~~~~~~~~~~~~~~~~~\n\n::\n\n $ onvif-cli devicemgmt GetHostname --user 'admin' --password '12345' --host '192.168.0.112' --port 80\n True: {'FromDHCP': True, 'Name': hision}\n $ onvif-cli devicemgmt SetHostname \"{'Name': 'NewerHostname'}\" --user 'admin' --password '12345' --host '192.168.0.112' --port 80\n True: {}\n\nInteractive mode\n~~~~~~~~~~~~~~~~\n\n::\n\n $ onvif-cli -u 'admin' -a '12345' --host '192.168.0.112' --port 80 --wsdl /etc/onvif/wsdl/\n ONVIF >>> cmd\n analytics devicemgmt events imaging media ptz\n ONVIF >>> cmd devicemgmt GetWsdlUrl\n True: http://www.onvif.org/\n ONVIF >>> cmd devicemgmt SetHostname {'Name': 'NewHostname'}\n ONVIF >>> cmd devicemgmt GetHostname\n True: {'Name': 'NewHostName'}\n ONVIF >>> cmd devicemgmt SomeOperation\n False: No Operation: SomeOperation\n\nNOTE: Tab completion is supported for interactive mode.\n\nBatch mode\n~~~~~~~~~~\n\n::\n\n $ vim batchcmds\n $ cat batchcmds\n cmd devicemgmt GetWsdlUrl\n cmd devicemgmt SetHostname {'Name': 'NewHostname', 'FromDHCP': True}\n cmd devicemgmt GetHostname\n $ onvif-cli --host 192.168.0.112 -u admin -a 12345 -w /etc/onvif/wsdl/ < batchcmds\n ONVIF >>> True: http://www.onvif.org/\n ONVIF >>> True: {}\n ONVIF >>> True: {'FromDHCP': False, 'Name': NewHostname}\n\nReferences\n----------\n\n* `ONVIF Offical Website <http://www.onvif.com>`_\n\n* `Operations Index <http://www.onvif.org/onvif/ver20/util/operationIndex.html>`_\n\n* `ONVIF Develop Documents <http://www.onvif.org/specs/DocMap-2.4.2.html>`_\n\n* `Foscam Python Lib <http://github.com/quatanium/foscam-python-lib>`_",
"bugtrack_url": null,
"license": "MIT",
"summary": "Python Client for ONVIF Camera",
"version": "0.2.12",
"project_urls": {
"Homepage": "http://github.com/quatanium/python-onvif"
},
"split_keywords": [
"onvif",
"camera",
"ipc"
],
"urls": [
{
"comment_text": "",
"digests": {
"blake2b_256": "d73cfe79b4f59337b5cf5d40ea747764b4ff38bab322b2de66706a4d8d7b01e8",
"md5": "06470cc2bfe8c7b13a555310ddfcd447",
"sha256": "aa8bbc02a73eaa50894b0c18e39fa8d318a583a664c65bf35b3c8029d1c40b49"
},
"downloads": -1,
"filename": "onvif_zeep-0.2.12.tar.gz",
"has_sig": false,
"md5_digest": "06470cc2bfe8c7b13a555310ddfcd447",
"packagetype": "sdist",
"python_version": "source",
"requires_python": null,
"size": 163061,
"upload_time": "2018-08-20T18:12:24",
"upload_time_iso_8601": "2018-08-20T18:12:24.209014Z",
"url": "https://files.pythonhosted.org/packages/d7/3c/fe79b4f59337b5cf5d40ea747764b4ff38bab322b2de66706a4d8d7b01e8/onvif_zeep-0.2.12.tar.gz",
"yanked": false,
"yanked_reason": null
}
],
"upload_time": "2018-08-20 18:12:24",
"github": true,
"gitlab": false,
"bitbucket": false,
"codeberg": false,
"github_user": "quatanium",
"github_project": "python-onvif",
"travis_ci": false,
"coveralls": false,
"github_actions": false,
"lcname": "onvif-zeep"
}
JSON
